en

PROTAPE® PUR 330 AS (LD)

Permanently antistatic
PROTAPE_PUR_330_AS_(LD)_main.jpg
PROTAPE_PUR_330_AS_(LD)_main.jpg Design
Antistatic polyurethane hose, light, microbe resistant + flame-resistant
Gas + Dust Pre-PUR® Abrasion-resistant High flexibility Microbe-resistant Flame retardant Partially coloured Antistatic and electrically conductive hoses Cut lengths 24 hour shipment service
Request
Datasheet
Product details Article variants Documents Accessories

Product details

Applications

  • flexible hose/ ducting for gases and for abrasive dust, powder, fibres
  • printed circuit board drilling machine (PCB)
  • extraction unit, dedusting system, filter system, oil mist extraction
  • extraction arm
  • chemical industry: chemical vapours, vapour return hose at loading arm, paint steam, spray mist extraction
  • explosion hazard area
  • animal stall, animal shed: barn ventilation
  • clean room ventilation, semiconductor production machine
  • surface preparation: shot blasting/ sand blasting recovery e.g. at blasting chamber, ship yard, stripping machine, flooring preparation machine, grinding machine
  • heating hose: exterior hose as protection hose

Properties

  • lightweight and reinforced
  • highly flexible + compressible 3:1
  • abrasion-resistant
  • microbe resistant
  • good resistance to oil, gasoline and chemicals
  • very good low temperature flexibility
  • flame-retardant according to: DIN 4102-B1
  • flame-retardant according to: UL94-HB
  • Permanently antistatic wall: according to ISO 8031 electrical and surface resistance <10⁹ Ω (according to NFPA 652 10⁸-10⁹ Ω)
  • in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: aspiration of combustible dust (zone 22 inside), for conveying of non-flammable liquids, for use in zone 1 and 2 (gases)
  • conforms to the safety regulations of the German Wood Trade Association
  • conforms to RoHS guideline
  • REACH according to --> Technology / Technical Information / REACH

Temperature Range

  • -40°C to 90°C
  • short time to 125°C

Design

  • PROTAPE® tape hose
  • 1. spring steel wire integrated in wall
  • 2. wall: permanently antistatic premium ester-polyurethane (Pre-PUR®)
  • 3. wall thickness 0,6 mm approx.

Delivery variants

  • further diameters and lengths available on request
  • transparent (standard)
  • special colours: partially coloured, completely coloured
  • customer-specific branding

Article variants

I.D.


(in / mm)
outer Ø


(mm)
Pressure
DIN 26057
(50% Elongation)
(bar)
Vacuum
DIN 26057
(axially fixed)
(bar)
Bending
Radius

(mm)
Weight


(kg/m)
Minimum
Quantity

(m)
Dimensions
in Stock

(m)
Production
Lengths

(m)
Order No.
standard
1 / 25
30.00
1,605 (4,18)
0,540 (1,00)
20.00
0.15
-
10
5 15
330-0025-1002
Further Article Details
I.D. (in / mm)
1 / 25
outer Ø (mm)
30.00
Pressure DIN 26057 (50% Elongation) (bar)
1,605 (4,18)
Vacuum DIN 26057 (axially fixed) (bar)
0,540 (1,00)
Bending Radius (mm)
20.00
Weight (kg/m)
0.15
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
- / 30
35.00
1,350 (3,50)
0,450 (1,00)
22.00
0.18
-
10
5 15
330-0030-1002
Further Article Details
I.D. (in / mm)
- / 30
outer Ø (mm)
35.00
Pressure DIN 26057 (50% Elongation) (bar)
1,350 (3,50)
Vacuum DIN 26057 (axially fixed) (bar)
0,450 (1,00)
Bending Radius (mm)
22.00
Weight (kg/m)
0.18
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
1,25 / 32
37.00
1,265 (3,29)
0,420 (1,00)
23.00
0.19
-
10
5 15
330-0032-1002
Further Article Details
I.D. (in / mm)
1,25 / 32
outer Ø (mm)
37.00
Pressure DIN 26057 (50% Elongation) (bar)
1,265 (3,29)
Vacuum DIN 26057 (axially fixed) (bar)
0,420 (1,00)
Bending Radius (mm)
23.00
Weight (kg/m)
0.19
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
1,5 / 38
43.00
1,075 (2,78)
0,355 (0,77)
26.00
0.22
-
10
5 15
330-0038-1002
Further Article Details
I.D. (in / mm)
1,5 / 38
outer Ø (mm)
43.00
Pressure DIN 26057 (50% Elongation) (bar)
1,075 (2,78)
Vacuum DIN 26057 (axially fixed) (bar)
0,355 (0,77)
Bending Radius (mm)
26.00
Weight (kg/m)
0.22
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
- / 40
48.00
1,020 (2,64)
0,335 (0,69)
27.00
0.23
-
10
5 15
330-0040-1002
Further Article Details
I.D. (in / mm)
- / 40
outer Ø (mm)
48.00
Pressure DIN 26057 (50% Elongation) (bar)
1,020 (2,64)
Vacuum DIN 26057 (axially fixed) (bar)
0,335 (0,69)
Bending Radius (mm)
27.00
Weight (kg/m)
0.23
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
2 / 50-51
59.00
0,820 (2,12)
0,220 (0,87)
33.00
0.37
-
10 15
5
330-0050-1002
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (mm)
59.00
Pressure DIN 26057 (50% Elongation) (bar)
0,820 (2,12)
Vacuum DIN 26057 (axially fixed) (bar)
0,220 (0,87)
Bending Radius (mm)
33.00
Weight (kg/m)
0.37
Minimum Quantity (m)
-
Dimensions in Stock (m)
10 15
Production Lengths (m)
5
2,36 / 60
68.00
0,685 (1,77)
0,180 (0,61)
38.00
0.43
-
10 15
5
330-0060-1002
Further Article Details
I.D. (in / mm)
2,36 / 60
outer Ø (mm)
68.00
Pressure DIN 26057 (50% Elongation) (bar)
0,685 (1,77)
Vacuum DIN 26057 (axially fixed) (bar)
0,180 (0,61)
Bending Radius (mm)
38.00
Weight (kg/m)
0.43
Minimum Quantity (m)
-
Dimensions in Stock (m)
10 15
Production Lengths (m)
5
2,5 / 63-65
73.00
0,635 (1,64)
0,165 (0,52)
41.00
0.46
-
10
5 15
330-0065-1002
Further Article Details
I.D. (in / mm)
2,5 / 63-65
outer Ø (mm)
73.00
Pressure DIN 26057 (50% Elongation) (bar)
0,635 (1,64)
Vacuum DIN 26057 (axially fixed) (bar)
0,165 (0,52)
Bending Radius (mm)
41.00
Weight (kg/m)
0.46
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
- / 70
78.00
0,590 (1,52)
0,155 (0,45)
43.00
0.50
-
10
5 15
330-0070-1002
Further Article Details
I.D. (in / mm)
- / 70
outer Ø (mm)
78.00
Pressure DIN 26057 (50% Elongation) (bar)
0,590 (1,52)
Vacuum DIN 26057 (axially fixed) (bar)
0,155 (0,45)
Bending Radius (mm)
43.00
Weight (kg/m)
0.50
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
3 / 75-76
83.00
0,550 (1,42)
0,145 (0,40)
46.00
0.53
-
10
5 15
330-0075-1002
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (mm)
83.00
Pressure DIN 26057 (50% Elongation) (bar)
0,550 (1,42)
Vacuum DIN 26057 (axially fixed) (bar)
0,145 (0,40)
Bending Radius (mm)
46.00
Weight (kg/m)
0.53
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
- / 80
88.00
0,515 (1,33)
0,135 (0,35)
48.00
0.57
-
10 15
5
330-0080-1002
Further Article Details
I.D. (in / mm)
- / 80
outer Ø (mm)
88.00
Pressure DIN 26057 (50% Elongation) (bar)
0,515 (1,33)
Vacuum DIN 26057 (axially fixed) (bar)
0,135 (0,35)
Bending Radius (mm)
48.00
Weight (kg/m)
0.57
Minimum Quantity (m)
-
Dimensions in Stock (m)
10 15
Production Lengths (m)
5
3,5 / 89-90
98.00
0,460 (1,19)
0,120 (0,28)
53.00
0.63
-
10
5 15
330-0090-1002
Further Article Details
I.D. (in / mm)
3,5 / 89-90
outer Ø (mm)
98.00
Pressure DIN 26057 (50% Elongation) (bar)
0,460 (1,19)
Vacuum DIN 26057 (axially fixed) (bar)
0,120 (0,28)
Bending Radius (mm)
53.00
Weight (kg/m)
0.63
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
4 / 100-102
110.00
0,415 (1,07)
0,080 (0,31)
58.00
0.67
-
5 10 15
-
330-0100-1002
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (mm)
110.00
Pressure DIN 26057 (50% Elongation) (bar)
0,415 (1,07)
Vacuum DIN 26057 (axially fixed) (bar)
0,080 (0,31)
Bending Radius (mm)
58.00
Weight (kg/m)
0.67
Minimum Quantity (m)
-
Dimensions in Stock (m)
5 10 15
Production Lengths (m)
-
- / 110
118.00
0,375 (0,97)
0,070 (0,26)
63.00
0.73
-
10
5 15
330-0110-1002
Further Article Details
I.D. (in / mm)
- / 110
outer Ø (mm)
118.00
Pressure DIN 26057 (50% Elongation) (bar)
0,375 (0,97)
Vacuum DIN 26057 (axially fixed) (bar)
0,070 (0,26)
Bending Radius (mm)
63.00
Weight (kg/m)
0.73
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
4,5 / 114-115
123.00
0,360 (0,93)
0,070 (0,24)
66.00
0.76
-
-
5 10 15
330-0115-1002
Further Article Details
I.D. (in / mm)
4,5 / 114-115
outer Ø (mm)
123.00
Pressure DIN 26057 (50% Elongation) (bar)
0,360 (0,93)
Vacuum DIN 26057 (axially fixed) (bar)
0,070 (0,24)
Bending Radius (mm)
66.00
Weight (kg/m)
0.76
Minimum Quantity (m)
-
Dimensions in Stock (m)
-
Production Lengths (m)
5 10 15
4,72 / 120
128.00
0,345 (0,89)
0,065 (0,22)
68.00
0.79
-
10 15
5
330-0120-1002
Further Article Details
I.D. (in / mm)
4,72 / 120
outer Ø (mm)
128.00
Pressure DIN 26057 (50% Elongation) (bar)
0,345 (0,89)
Vacuum DIN 26057 (axially fixed) (bar)
0,065 (0,22)
Bending Radius (mm)
68.00
Weight (kg/m)
0.79
Minimum Quantity (m)
-
Dimensions in Stock (m)
10 15
Production Lengths (m)
5
5 / 125-127
135.00
0,335 (0,86)
0,065 (0,20)
71.00
0.83
-
10 15
5
330-0125-1002
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (mm)
135.00
Pressure DIN 26057 (50% Elongation) (bar)
0,335 (0,86)
Vacuum DIN 26057 (axially fixed) (bar)
0,065 (0,20)
Bending Radius (mm)
71.00
Weight (kg/m)
0.83
Minimum Quantity (m)
-
Dimensions in Stock (m)
10 15
Production Lengths (m)
5
- / 130
138.00
0,320 (0,82)
0,060 (0,19)
73.00
0.86
-
10
5 15
330-0130-1002
Further Article Details
I.D. (in / mm)
- / 130
outer Ø (mm)
138.00
Pressure DIN 26057 (50% Elongation) (bar)
0,320 (0,82)
Vacuum DIN 26057 (axially fixed) (bar)
0,060 (0,19)
Bending Radius (mm)
73.00
Weight (kg/m)
0.86
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
5,5 / 140
148.00
0,295 (0,76)
0,055 (0,16)
78.00
0.92
-
10 15
5
330-0140-1002
Further Article Details
I.D. (in / mm)
5,5 / 140
outer Ø (mm)
148.00
Pressure DIN 26057 (50% Elongation) (bar)
0,295 (0,76)
Vacuum DIN 26057 (axially fixed) (bar)
0,055 (0,16)
Bending Radius (mm)
78.00
Weight (kg/m)
0.92
Minimum Quantity (m)
-
Dimensions in Stock (m)
10 15
Production Lengths (m)
5
6 / 150-152
160.00
0,275 (0,71)
0,055 (0,14)
83.00
0.99
-
10 15
5
330-0150-1002
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (mm)
160.00
Pressure DIN 26057 (50% Elongation) (bar)
0,275 (0,71)
Vacuum DIN 26057 (axially fixed) (bar)
0,055 (0,14)
Bending Radius (mm)
83.00
Weight (kg/m)
0.99
Minimum Quantity (m)
-
Dimensions in Stock (m)
10 15
Production Lengths (m)
5
6,3 / 160
168.00
0,260 (0,67)
0,050 (0,12)
88.00
1.05
-
10 15
5
330-0160-1002
Further Article Details
I.D. (in / mm)
6,3 / 160
outer Ø (mm)
168.00
Pressure DIN 26057 (50% Elongation) (bar)
0,260 (0,67)
Vacuum DIN 26057 (axially fixed) (bar)
0,050 (0,12)
Bending Radius (mm)
88.00
Weight (kg/m)
1.05
Minimum Quantity (m)
-
Dimensions in Stock (m)
10 15
Production Lengths (m)
5
- / 170
178.00
0,245 (0,63)
0,045 (0,11)
93.00
1.11
-
10
5 15
330-0170-1002
Further Article Details
I.D. (in / mm)
- / 170
outer Ø (mm)
178.00
Pressure DIN 26057 (50% Elongation) (bar)
0,245 (0,63)
Vacuum DIN 26057 (axially fixed) (bar)
0,045 (0,11)
Bending Radius (mm)
93.00
Weight (kg/m)
1.11
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
7 / 178-180
188.00
0,230 (0,59)
0,045 (0,10)
98.00
1.17
-
10
5 15
330-0180-1002
Further Article Details
I.D. (in / mm)
7 / 178-180
outer Ø (mm)
188.00
Pressure DIN 26057 (50% Elongation) (bar)
0,230 (0,59)
Vacuum DIN 26057 (axially fixed) (bar)
0,045 (0,10)
Bending Radius (mm)
98.00
Weight (kg/m)
1.17
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5 15
8 / 200-203
210.00
0,210 (0,54)
0,030 (0,11)
108.00
1.33
-
10 15
5
330-0200-1002
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (mm)
210.00
Pressure DIN 26057 (50% Elongation) (bar)
0,210 (0,54)
Vacuum DIN 26057 (axially fixed) (bar)
0,030 (0,11)
Bending Radius (mm)
108.00
Weight (kg/m)
1.33
Minimum Quantity (m)
-
Dimensions in Stock (m)
10 15
Production Lengths (m)
5
- / 225
233.00
0,185 (0,48)
0,025 (0,09)
121.00
1.48
-
10
5
330-0225-1002
Further Article Details
I.D. (in / mm)
- / 225
outer Ø (mm)
233.00
Pressure DIN 26057 (50% Elongation) (bar)
0,185 (0,48)
Vacuum DIN 26057 (axially fixed) (bar)
0,025 (0,09)
Bending Radius (mm)
121.00
Weight (kg/m)
1.48
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5
- / 250
258.00
0,165 (0,43)
0,025 (0,07)
133.00
1.64
-
10
5
330-0250-1002
Further Article Details
I.D. (in / mm)
- / 250
outer Ø (mm)
258.00
Pressure DIN 26057 (50% Elongation) (bar)
0,165 (0,43)
Vacuum DIN 26057 (axially fixed) (bar)
0,025 (0,07)
Bending Radius (mm)
133.00
Weight (kg/m)
1.64
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5
10 / 254
262.00
0,165 (0,42)
0,025 (0,06)
135.00
1.66
-
-
5 10
330-0254-1002
Further Article Details
I.D. (in / mm)
10 / 254
outer Ø (mm)
262.00
Pressure DIN 26057 (50% Elongation) (bar)
0,165 (0,42)
Vacuum DIN 26057 (axially fixed) (bar)
0,025 (0,06)
Bending Radius (mm)
135.00
Weight (kg/m)
1.66
Minimum Quantity (m)
-
Dimensions in Stock (m)
-
Production Lengths (m)
5 10
11 / 280
288.00
0,150 (0,38)
0,020 (0,05)
148.00
1.83
-
10
5
330-0280-1002
Further Article Details
I.D. (in / mm)
11 / 280
outer Ø (mm)
288.00
Pressure DIN 26057 (50% Elongation) (bar)
0,150 (0,38)
Vacuum DIN 26057 (axially fixed) (bar)
0,020 (0,05)
Bending Radius (mm)
148.00
Weight (kg/m)
1.83
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5
- / 300
309.00
0,140 (0,36)
0,020 (0,05)
159.00
2.14
-
10
5
330-0300-1002
Further Article Details
I.D. (in / mm)
- / 300
outer Ø (mm)
309.00
Pressure DIN 26057 (50% Elongation) (bar)
0,140 (0,36)
Vacuum DIN 26057 (axially fixed) (bar)
0,020 (0,05)
Bending Radius (mm)
159.00
Weight (kg/m)
2.14
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5
12 / 305
314.00
0,135 (0,35)
0,020 (0,05)
162.00
2.17
-
10
5
330-0305-1002
Further Article Details
I.D. (in / mm)
12 / 305
outer Ø (mm)
314.00
Pressure DIN 26057 (50% Elongation) (bar)
0,135 (0,35)
Vacuum DIN 26057 (axially fixed) (bar)
0,020 (0,05)
Bending Radius (mm)
162.00
Weight (kg/m)
2.17
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5
- / 315
324.00
0,135 (0,34)
0,020 (0,05)
167.00
2.24
-
10
5
330-0315-1002
Further Article Details
I.D. (in / mm)
- / 315
outer Ø (mm)
324.00
Pressure DIN 26057 (50% Elongation) (bar)
0,135 (0,34)
Vacuum DIN 26057 (axially fixed) (bar)
0,020 (0,05)
Bending Radius (mm)
167.00
Weight (kg/m)
2.24
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5
- / 350
359.00
0,120 (0,31)
0,020 (0,04)
184.00
2.49
-
10
5
330-0350-1002
Further Article Details
I.D. (in / mm)
- / 350
outer Ø (mm)
359.00
Pressure DIN 26057 (50% Elongation) (bar)
0,120 (0,31)
Vacuum DIN 26057 (axially fixed) (bar)
0,020 (0,04)
Bending Radius (mm)
184.00
Weight (kg/m)
2.49
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5
14 / 356
365.00
0,115 (0,30)
0,015 (0,03)
187.00
2.53
-
10
5
330-0356-1002
Further Article Details
I.D. (in / mm)
14 / 356
outer Ø (mm)
365.00
Pressure DIN 26057 (50% Elongation) (bar)
0,115 (0,30)
Vacuum DIN 26057 (axially fixed) (bar)
0,015 (0,03)
Bending Radius (mm)
187.00
Weight (kg/m)
2.53
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5
- / 400
409.00
0,105 (0,27)
0,015 (0,02)
209.00
2.84
-
10
5
330-0400-1002
Further Article Details
I.D. (in / mm)
- / 400
outer Ø (mm)
409.00
Pressure DIN 26057 (50% Elongation) (bar)
0,105 (0,27)
Vacuum DIN 26057 (axially fixed) (bar)
0,015 (0,02)
Bending Radius (mm)
209.00
Weight (kg/m)
2.84
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
5
neutral imprint: antistatic + microbe resistant / no cutting
1,5 / 38
43.00
1,075 (2,78)
0,355 (0,77)
26.00
0.22
-
10
-
330-0038-0007
Further Article Details
I.D. (in / mm)
1,5 / 38
outer Ø (mm)
43.00
Pressure DIN 26057 (50% Elongation) (bar)
1,075 (2,78)
Vacuum DIN 26057 (axially fixed) (bar)
0,355 (0,77)
Bending Radius (mm)
26.00
Weight (kg/m)
0.22
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
2 / 50-51
59.00
0,820 (2,12)
0,220 (0,87)
33.00
0.37
-
10
-
330-0050-0007
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (mm)
59.00
Pressure DIN 26057 (50% Elongation) (bar)
0,820 (2,12)
Vacuum DIN 26057 (axially fixed) (bar)
0,220 (0,87)
Bending Radius (mm)
33.00
Weight (kg/m)
0.37
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
2,36 / 60
68.00
0,685 (1,77)
0,180 (0,61)
38.00
0.43
-
10
-
330-0060-0007
Further Article Details
I.D. (in / mm)
2,36 / 60
outer Ø (mm)
68.00
Pressure DIN 26057 (50% Elongation) (bar)
0,685 (1,77)
Vacuum DIN 26057 (axially fixed) (bar)
0,180 (0,61)
Bending Radius (mm)
38.00
Weight (kg/m)
0.43
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
2,5 / 63-65
73.00
0,635 (1,64)
0,165 (0,52)
41.00
0.46
-
10
-
330-0065-0007
Further Article Details
I.D. (in / mm)
2,5 / 63-65
outer Ø (mm)
73.00
Pressure DIN 26057 (50% Elongation) (bar)
0,635 (1,64)
Vacuum DIN 26057 (axially fixed) (bar)
0,165 (0,52)
Bending Radius (mm)
41.00
Weight (kg/m)
0.46
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
3 / 75-76
83.00
0,550 (1,42)
0,145 (0,40)
46.00
0.53
-
10
-
330-0075-0007
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (mm)
83.00
Pressure DIN 26057 (50% Elongation) (bar)
0,550 (1,42)
Vacuum DIN 26057 (axially fixed) (bar)
0,145 (0,40)
Bending Radius (mm)
46.00
Weight (kg/m)
0.53
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
- / 80
88.00
0,515 (1,33)
0,135 (0,35)
48.00
0.57
-
10
-
330-0080-0007
Further Article Details
I.D. (in / mm)
- / 80
outer Ø (mm)
88.00
Pressure DIN 26057 (50% Elongation) (bar)
0,515 (1,33)
Vacuum DIN 26057 (axially fixed) (bar)
0,135 (0,35)
Bending Radius (mm)
48.00
Weight (kg/m)
0.57
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
4 / 100-102
110.00
0,415 (1,07)
0,080 (0,31)
58.00
0.67
-
10
-
330-0100-0007
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (mm)
110.00
Pressure DIN 26057 (50% Elongation) (bar)
0,415 (1,07)
Vacuum DIN 26057 (axially fixed) (bar)
0,080 (0,31)
Bending Radius (mm)
58.00
Weight (kg/m)
0.67
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
4,72 / 120
128.00
0,345 (0,89)
0,065 (0,22)
68.00
0.79
-
10
-
330-0120-0007
Further Article Details
I.D. (in / mm)
4,72 / 120
outer Ø (mm)
128.00
Pressure DIN 26057 (50% Elongation) (bar)
0,345 (0,89)
Vacuum DIN 26057 (axially fixed) (bar)
0,065 (0,22)
Bending Radius (mm)
68.00
Weight (kg/m)
0.79
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
5 / 125-127
135.00
0,335 (0,86)
0,065 (0,20)
71.00
0.83
-
10
-
330-0125-0007
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (mm)
135.00
Pressure DIN 26057 (50% Elongation) (bar)
0,335 (0,86)
Vacuum DIN 26057 (axially fixed) (bar)
0,065 (0,20)
Bending Radius (mm)
71.00
Weight (kg/m)
0.83
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
6 / 150-152
160.00
0,275 (0,71)
0,055 (0,14)
83.00
0.99
-
10
-
330-0150-0007
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (mm)
160.00
Pressure DIN 26057 (50% Elongation) (bar)
0,275 (0,71)
Vacuum DIN 26057 (axially fixed) (bar)
0,055 (0,14)
Bending Radius (mm)
83.00
Weight (kg/m)
0.99
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
6,3 / 160
168.00
0,260 (0,67)
0,050 (0,12)
88.00
1.05
-
10
-
330-0160-0007
Further Article Details
I.D. (in / mm)
6,3 / 160
outer Ø (mm)
168.00
Pressure DIN 26057 (50% Elongation) (bar)
0,260 (0,67)
Vacuum DIN 26057 (axially fixed) (bar)
0,050 (0,12)
Bending Radius (mm)
88.00
Weight (kg/m)
1.05
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
8 / 200-203
210.00
0,210 (0,54)
0,030 (0,11)
108.00
1.33
-
10
-
330-0200-0007
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (mm)
210.00
Pressure DIN 26057 (50% Elongation) (bar)
0,210 (0,54)
Vacuum DIN 26057 (axially fixed) (bar)
0,030 (0,11)
Bending Radius (mm)
108.00
Weight (kg/m)
1.33
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
- / 250
258.00
0,165 (0,43)
0,025 (0,07)
133.00
1.64
-
10
-
330-0250-0007
Further Article Details
I.D. (in / mm)
- / 250
outer Ø (mm)
258.00
Pressure DIN 26057 (50% Elongation) (bar)
0,165 (0,43)
Vacuum DIN 26057 (axially fixed) (bar)
0,025 (0,07)
Bending Radius (mm)
133.00
Weight (kg/m)
1.64
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
- / 300
309.00
0,140 (0,36)
0,020 (0,05)
159.00
2.14
-
10
-
330-0300-0007
Further Article Details
I.D. (in / mm)
- / 300
outer Ø (mm)
309.00
Pressure DIN 26057 (50% Elongation) (bar)
0,140 (0,36)
Vacuum DIN 26057 (axially fixed) (bar)
0,020 (0,05)
Bending Radius (mm)
159.00
Weight (kg/m)
2.14
Minimum Quantity (m)
-
Dimensions in Stock (m)
10
Production Lengths (m)
-
more compressed packaging approx. 4:1, neutral imprint, no cutting, not flame-resistant acc. to DIN 4102-B1, not acc. to TRGS 727 and ATEX 2014/34/EU (1999/92/EC)
doesn't fulfil the safety regulations of the German Wood Trade Association
7 / 178-180
188.00
0,230 (0,59)
0,045 (0,10)
98.00
0.83
80
-
-
330-0180-2030
Further Article Details
I.D. (in / mm)
7 / 178-180
outer Ø (mm)
188.00
Pressure DIN 26057 (50% Elongation) (bar)
0,230 (0,59)
Vacuum DIN 26057 (axially fixed) (bar)
0,045 (0,10)
Bending Radius (mm)
98.00
Weight (kg/m)
0.83
Minimum Quantity (m)
80
Dimensions in Stock (m)
-
Production Lengths (m)
-
8 / 200-203
210.00
0,210 (0,54)
0,030 (0,11)
108.00
0.93
60
-
-
330-0200-2030
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (mm)
210.00
Pressure DIN 26057 (50% Elongation) (bar)
0,210 (0,54)
Vacuum DIN 26057 (axially fixed) (bar)
0,030 (0,11)
Bending Radius (mm)
108.00
Weight (kg/m)
0.93
Minimum Quantity (m)
60
Dimensions in Stock (m)
-
Production Lengths (m)
-
- / 250
256.00
0,165 (0,43)
0,025 (0,07)
133.00
1.14
50
-
-
330-0250-2030
Further Article Details
I.D. (in / mm)
- / 250
outer Ø (mm)
256.00
Pressure DIN 26057 (50% Elongation) (bar)
0,165 (0,43)
Vacuum DIN 26057 (axially fixed) (bar)
0,025 (0,07)
Bending Radius (mm)
133.00
Weight (kg/m)
1.14
Minimum Quantity (m)
50
Dimensions in Stock (m)
-
Production Lengths (m)
-
- / 300
309.00
0,140 (0,36)
0,020 (0,05)
159.00
1.47
40
-
-
330-0300-2030
Further Article Details
I.D. (in / mm)
- / 300
outer Ø (mm)
309.00
Pressure DIN 26057 (50% Elongation) (bar)
0,140 (0,36)
Vacuum DIN 26057 (axially fixed) (bar)
0,020 (0,05)
Bending Radius (mm)
159.00
Weight (kg/m)
1.47
Minimum Quantity (m)
40
Dimensions in Stock (m)
-
Production Lengths (m)
-
Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the inside of the hose arch. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data. Additional information at www.norres.com/en/technology/.

Documents

Montagehinweis / Assembly Information (384.89 KB) TRGS 727 / ATEX Test report / manufacturer (93.64 KB) Verlegerichtlinien / Installation guidelines (201.24 KB) Brandschutzprüfung - DIN / Fire safety regulation (1.38 MB) TRGS 727 / ATEX Zertifikat / certificate (1.28 MB) UL94-HB Test report (169.52 KB)

Accessories

CLAMP 210 BRIDGE CLAMP
Clamp with plastic bridge for attaching externally corrugated spiral hoses
To the product
CLAMP 212
Bridge clamp for attaching externally corrugated spiral hoses
To the product
CLAMP 213
Bridge Clamp with quick-release closure for attaching externally corrugated spiral hoses
To the product
CLAMP 217
Bridge clamp with eyelet for attaching externally corrugated spiral hoses
To the product
CONNECT 223
Shrink sleeve for connecting one hose to another or to an adapter
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT 270-271
Metal hose connector / reducer
To the product