en

PROTAPE® TPE 321 REINFORCED (LD)

PROTAPE_TPE_321_REINFORCED_(LD)_main.jpg
PROTAPE_TPE_321_REINFORCED_(LD)_main.jpg design
TPE hose, light, fabric reinforced (up to +125°C)
Gas High flexibility
Request
Datasheet
Product details Article variants Documents Accessories

Product details

Applications

  • flexible hose/ ducting for hot and cold gases
  • granulate/ plastic dryer, hot air dryer
  • film blowing machine, cooling air at the extrusion tool
  • air supply: UV dryer, IR dryer
  • textile industry, steam soaking: steam iron, industrial ironing machine, smoothing iron
  • bus, utility vehicle, caravan/ trailer, mobile home/ camper/ RV, boat, ship/ vessel/ marine, yacht: ventilation, heating
  • paper mill, paper and pulp industry: waste water, air extraction
  • heating system/ heater: fresh air supply

Properties

  • fabric reinforced
  • light weight
  • highly flexible + compressible
  • very good heat resistance
  • conforms to RoHS guideline
  • good resistance to oil, gasoline and chemicals
  • good resistance to alkalis and acids
  • REACH according to --> Technology / Technical Information / REACH

Temperature Range

  • -40°C to 110°C
  • short time to 125°C

Design

  • PROTAPE® tape hose
  • spring steel wire integrated in wall
  • fabric-reinforced tape
  • wall: EPDM/ PP coated fabric
  • wall thickness 0,4 mm approx.

Delivery variants

  • further diameters and lengths available on request
  • black (standard)

Article variants

I.D.


(in / mm)
outer Ø


(mm)
Pressure


(bar)
Vacuum


(bar)
Bending
Radius

(mm)
Weight


(kg/m)
Production
Lengths

(m)
Order No.
2 / 50-51
53.60
0,300
0,100
50.00
0.21
10
321-0050-0000
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (mm)
53.60
Pressure (bar)
0,300
Vacuum (bar)
0,100
Bending Radius (mm)
50.00
Weight (kg/m)
0.21
Production Lengths (m)
10
3 / 75-76
78.60
0,200
0,070
70.00
0.31
10
321-0075-0000
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (mm)
78.60
Pressure (bar)
0,200
Vacuum (bar)
0,070
Bending Radius (mm)
70.00
Weight (kg/m)
0.31
Production Lengths (m)
10
4 / 100-102
104.00
0,150
0,050
100.00
0.56
10
321-0100-0000
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (mm)
104.00
Pressure (bar)
0,150
Vacuum (bar)
0,050
Bending Radius (mm)
100.00
Weight (kg/m)
0.56
Production Lengths (m)
10
5 / 125-127
129.00
0,130
0,040
125.00
0.68
10
321-0125-0000
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (mm)
129.00
Pressure (bar)
0,130
Vacuum (bar)
0,040
Bending Radius (mm)
125.00
Weight (kg/m)
0.68
Production Lengths (m)
10
6 / 150-152
154.00
0,110
0,040
150.00
0.73
10
321-0150-0000
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (mm)
154.00
Pressure (bar)
0,110
Vacuum (bar)
0,040
Bending Radius (mm)
150.00
Weight (kg/m)
0.73
Production Lengths (m)
10
8 / 200-203
204.00
0,080
0,025
200.00
1.28
10
321-0200-0000
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (mm)
204.00
Pressure (bar)
0,080
Vacuum (bar)
0,025
Bending Radius (mm)
200.00
Weight (kg/m)
1.28
Production Lengths (m)
10
- / 250
254.80
0,070
0,020
250.00
1.40
10
321-0250-0000
Further Article Details
I.D. (in / mm)
- / 250
outer Ø (mm)
254.80
Pressure (bar)
0,070
Vacuum (bar)
0,020
Bending Radius (mm)
250.00
Weight (kg/m)
1.40
Production Lengths (m)
10
- / 300
304.80
0,050
0,015
300.00
1.55
10
321-0300-0000
Further Article Details
I.D. (in / mm)
- / 300
outer Ø (mm)
304.80
Pressure (bar)
0,050
Vacuum (bar)
0,015
Bending Radius (mm)
300.00
Weight (kg/m)
1.55
Production Lengths (m)
10
- / 350
354.80
0,040
0,015
350.00
1.60
10
321-0350-0000
Further Article Details
I.D. (in / mm)
- / 350
outer Ø (mm)
354.80
Pressure (bar)
0,040
Vacuum (bar)
0,015
Bending Radius (mm)
350.00
Weight (kg/m)
1.60
Production Lengths (m)
10
- / 400
404.80
0,040
0,015
400.00
1.77
10
321-0400-0000
Further Article Details
I.D. (in / mm)
- / 400
outer Ø (mm)
404.80
Pressure (bar)
0,040
Vacuum (bar)
0,015
Bending Radius (mm)
400.00
Weight (kg/m)
1.77
Production Lengths (m)
10
- / 450
454.80
0,030
0,010
450.00
1.99
10
321-0450-0000
Further Article Details
I.D. (in / mm)
- / 450
outer Ø (mm)
454.80
Pressure (bar)
0,030
Vacuum (bar)
0,010
Bending Radius (mm)
450.00
Weight (kg/m)
1.99
Production Lengths (m)
10
Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the inside of the hose arch. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data. Additional information at www.norres.com/en/technology/.

Documents

Montagehinweis / Assembly Information (384.89 KB) Verlegerichtlinien / Installation guidelines (201.24 KB)

Accessories

CLAMP 210 BRIDGE CLAMP
Clamp with plastic bridge for attaching externally corrugated spiral hoses
To the product
CLAMP 212
Bridge clamp for attaching externally corrugated spiral hoses
To the product
CLAMP 213
Bridge Clamp with quick-release closure for attaching externally corrugated spiral hoses
To the product
CLAMP 217
Bridge clamp with eyelet for attaching externally corrugated spiral hoses
To the product
CONNECT 223
Shrink sleeve for connecting one hose to another or to an adapter
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT 270-271
Metal hose connector / reducer
To the product