.svg){kind=logo}
CP HYP 450 PROTECT
Exhaust gas hose, vibration resistant, outer protection profile
Product details
Applications
- flexible hose/ ducting for hot gases
- vehicle gas exhaust system, car gas extraction: hose reel, slotted floor channel, underfloor extraction system
- engine test bench, exhaust gas measurement
Properties
- outer protection profile made of elasticised material
- abrasion protection via external clamp profile
- secure clamping of the wall within the clamp profile
- highly flexible + compressible
- vibration resistant
- very good heat resistance
- good resistance to chemicals
- 1 clamp-cover band and 2 end-caps included
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
Temperature Range
- exhaust gas temperatures to 200°C *
- * when correctly applied with exhaust gas funnels and sufficient fresh air supply (50% approx.).
Design
- CP construction
- 1. clamp profile supporting spiral: galvanised steel
- 2. wall: CSM coated polyester fabric
- 3. firmly clamped, shock-absorbing, anti-abrasion profile made from elasticised, high-temperature plastic
Delivery variants
- further diameters and lengths available on request
- special colours: coloured spiral
- stainless steel (INOX) clamp profile
Article variants
I.D.
(in / mm)
(in / mm)
outer Ø
(mm)
(mm)
Pressure
(bar)
(bar)
Vacuum
(bar)
(bar)
Bending
Radius
(mm)
Radius
(mm)
Weight
(kg/m)
(kg/m)
Dimensions
in Stock
(m)
in Stock
(m)
Order No.
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (mm)
89.00
Pressure (bar)
0,500
Vacuum (bar)
0,230
Bending Radius (mm)
48.00
Weight (kg/m)
1.00
Dimensions in Stock (m)
2,5 5 6 7,5
Further Article Details
I.D. (in / mm)
- / 80
outer Ø (mm)
94.00
Pressure (bar)
0,485
Vacuum (bar)
0,200
Bending Radius (mm)
49.00
Weight (kg/m)
1.06
Dimensions in Stock (m)
2,5 5 6 7,5
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (mm)
114.00
Pressure (bar)
0,300
Vacuum (bar)
0,120
Bending Radius (mm)
58.00
Weight (kg/m)
1.03
Dimensions in Stock (m)
2,5 5 6 7,5 10 12,5 15
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (mm)
139.00
Pressure (bar)
0,260
Vacuum (bar)
0,085
Bending Radius (mm)
70.00
Weight (kg/m)
1.27
Dimensions in Stock (m)
2,5 5 6 7,5 10 12,5 15
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (mm)
164.00
Pressure (bar)
0,165
Vacuum (bar)
0,050
Bending Radius (mm)
81.00
Weight (kg/m)
1.27
Dimensions in Stock (m)
2,5 5 6 7,5 10 12,5 15
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (mm)
214.00
Pressure (bar)
0,140
Vacuum (bar)
0,030
Bending Radius (mm)
103.00
Weight (kg/m)
1.56
Dimensions in Stock (m)
2,5 5 6 7,5 10 12,5 15
Further Article Details
I.D. (in / mm)
- / 250
outer Ø (mm)
264.00
Pressure (bar)
0,100
Vacuum (bar)
0,020
Bending Radius (mm)
125.00
Weight (kg/m)
1.94
Dimensions in Stock (m)
2,5 5 6 7,5 10 12,5 15
Further Article Details
I.D. (in / mm)
10 / 254
outer Ø (mm)
268.00
Pressure (bar)
0,095
Vacuum (bar)
0,020
Bending Radius (mm)
130.00
Weight (kg/m)
2.00
Dimensions in Stock (m)
2,5 5 6 7,5 10 12,5 15
Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the inside of the hose arch. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data. Additional information at www.norres.com/en/technology/.
Accessories
CLAMP 212
Bridge clamp for attaching externally corrugated spiral hoses
To the product
CLAMP 213
Bridge Clamp with quick-release closure for attaching externally corrugated spiral hoses
To the product
CLAMP 217
Bridge clamp with eyelet for attaching externally corrugated spiral hoses
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT 270-271
Metal hose connector / reducer
To the product