CONNECT STORZ DIN ALU 251

Storz suction coupling

Product details

Application

  • construction industry: lowering groundwater
  • wood pellet heating system: conveying of wood pellets

Properties

  • DIN design - forged aluminium (52-C = DIN 14321 / 75-B = DIN 14322 / 110-A = DIN 14323)
  • Not to be used for explosive fluides group 1 and not according to pressure equipment directive
  • REACH according to --> Technology / Technical Information / REACH

Suitable for hose

  • AIRDUC®: 355 (AS / VAC-TRUCK REINFORCED); 356 (AS / FOOD REINFORCED); 357

    NORPLAST®: 386 + 387

    BARDUC®: 381

Article variants

Size


(mm)
Lug
Spacing

(mm)
Weight


(kg/pcs)
Suitable for
Hose I.D.

(mm)
Order No.
replacement seal NBR back
52-C
66
0,02
-
Further Article Details
Size (mm)
52-C
Lug Spacing (mm)
66
Weight (kg/pcs)
0,02
Suitable for Hose I.D. (mm)
-
75-B
89
0,03
-
Further Article Details
Size (mm)
75-B
Lug Spacing (mm)
89
Weight (kg/pcs)
0,03
Suitable for Hose I.D. (mm)
-
110-A
133
0,05
-
Further Article Details
Size (mm)
110-A
Lug Spacing (mm)
133
Weight (kg/pcs)
0,05
Suitable for Hose I.D. (mm)
-
with corrugated nozzle for band clamp fitting; suitable to CONNECT 229 CLAMP ASSEMBLY
52-C
66
0,35
50
Further Article Details
Size (mm)
52-C
Lug Spacing (mm)
66
Weight (kg/pcs)
0,35
Suitable for Hose I.D. (mm)
50
75-B
89
0,66
75
Further Article Details
Size (mm)
75-B
Lug Spacing (mm)
89
Weight (kg/pcs)
0,66
Suitable for Hose I.D. (mm)
75
110-A
133
1,84
100
Further Article Details
Size (mm)
110-A
Lug Spacing (mm)
133
Weight (kg/pcs)
1,84
Suitable for Hose I.D. (mm)
100
with smooth nozzle and locking ring for clamp shell band fitting; suitable to CONNECT 231 SAFETY CLAMP ASSEMBLY
52-C
66
0,35
50
Further Article Details
Size (mm)
52-C
Lug Spacing (mm)
66
Weight (kg/pcs)
0,35
Suitable for Hose I.D. (mm)
50
75-B
89
0,66
75
Further Article Details
Size (mm)
75-B
Lug Spacing (mm)
89
Weight (kg/pcs)
0,66
Suitable for Hose I.D. (mm)
75
110-A
133
1.84
100
Further Article Details
Size (mm)
110-A
Lug Spacing (mm)
133
Weight (kg/pcs)
1.84
Suitable for Hose I.D. (mm)
100
Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the inside of the hose arch. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data. Additional technical data here

Accessories