en

3127 TEMPERFORM/RED

3127_TEMPERFORM_RED_main.jpg
3127_TEMPERFORM_RED_main.jpg
Cooling hose for injection molding machines
Gas + Dust + Liquid + Solids Smooth interior High flexibility
Request
Datasheet
Product details Article variants

Product details

Applications

  • often used in injection molding machines in the thermoplastics industry
  • frequently used as cooling water hose for hot and cold water

Properties

  • according to the norm EN ISO 1307:2008
  • UV and ozone resistant
  • kink proof, dimensionally stable and extremely flexible
  • burst pressure 60 bar

Temperature Range

  • -20°C to 100°C

Design

  • inner tube made of EPDM
  • outer layer made of EPDM
  • outer layer smooth and extruded
  • textile plies

Delivery variants

  • black inner tube, red exterior wall

Article variants

I.D.


(in / mm)
outer Ø


(mm)
Operating pressure
(20°C)

(bar)
Wall
Thickness

(mm)
Bending
Radius

(mm)
Weight


(kg/m)
Dimensions
in Stock

(m)
Order No.
3/8 / 9,5
18.00
20,000
4.25
75.00
0.27
40
3127-009-001
Further Article Details
I.D. (in / mm)
3/8 / 9,5
outer Ø (mm)
18.00
Operating pressure (20°C) (bar)
20,000
Wall Thickness (mm)
4.25
Bending Radius (mm)
75.00
Weight (kg/m)
0.27
Dimensions in Stock (m)
40
1/2 / 12,7
22.00
20,000
4.65
100.00
0.37
40
3127-013-001
Further Article Details
I.D. (in / mm)
1/2 / 12,7
outer Ø (mm)
22.00
Operating pressure (20°C) (bar)
20,000
Wall Thickness (mm)
4.65
Bending Radius (mm)
100.00
Weight (kg/m)
0.37
Dimensions in Stock (m)
40
Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the inside of the hose arch. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data. Additional information at www.norres.com/en/technology/.