.svg){kind=logo}
NORPLAST® PUR 387 ANTIABRASIVO® AS
Abrasive resistant polyurethane lined hose
Product details
Application
- Suitable for gravel, sand, mud, cement, grain, grit and other abrasive materials
- Very suitable for use as an extremely wear resistant transport hose/pipe
- Widely used in the industrial cleaning and roofing industry for transporting gravel to flat roofs
Properties
- Robust and very durable
- According to the norm EN ISO 1307:2008
- Vacuum up to 0.8 bar
Temperature range
- 5°F to 140°F
Design
- Extremely thick inner layer made of polyurethane (0.08 inch)
- PVC outer layer
- Slightly corrugated construction cover
- Rigid PVC spiral
- With copper stranded wire
- smooth interior
Delivery variants
- red inner tube, green exterior wall (standard)
Article variants
I.D.
(in / mm)
(in / mm)
outer Ø
(in)
(in)
Vacuum
(inHG)
(inHG)
Operating
pressure
(68°F)
(bar)
pressure
(68°F)
(bar)
Bending
radius
(in)
radius
(in)
Weight
(lb/ft)
(lb/ft)
Dimensions
in Stock
(ft)
in Stock
(ft)
Production
lengths
(ft)
lengths
(ft)
Order No.
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (in)
3.622
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
6,500
Bending radius (in)
17.953
Weight (lb/ft)
1.546
Dimensions in Stock (ft)
150
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (in)
4.724
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
4,000
Bending radius (in)
24.094
Weight (lb/ft)
2.204
Dimensions in Stock (ft)
100
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (in)
5.787
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
3,500
Bending radius (in)
30.000
Weight (lb/ft)
3.024
Dimensions in Stock (ft)
100
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (in)
6.811
Vacuum (inHG)
23.624
Operating pressure (68°F) (bar)
3,000
Bending radius (in)
35.906
Weight (lb/ft)
4.099
Dimensions in Stock (ft)
50
Production lengths (ft)
-
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.