.svg){kind=logo}
AIRDUC® PUR 357 VAC-TRUCK
Vacuum truck hose, extremely heavy duty
Product details
Application
- hose/ ducting for high throughput of extremely abrasive bulk material, granulate and stone
- suction excavator
- concrete pump: outlet hose, discharge hose
- construction industry: rock drill, rock drilling machine
- raw material conveying hose for powders, granulates, sand, quartz, gravel, shards and chips/ shavings
Properties
- extremely heavy duty
- extremely abrasion-resistant with extremely thick polyurethane wall
- very high pressure, vacuum and compression resistance
- very good low temperature flexibility
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
Temperature range
- -40°F to 195°F
- short time to 255°F
Design
- AIRDUC® profile hose
- 1. spring steel wire firmly embedded in wall
- 2. wall: special premium ester-polyurethane (Pre-PUR®)
- 3. wall thickness 0.15 to 0.2 in approx.
Delivery variants
- further diameters and lengths available on request
- transparent (standard)
- special colors: full colored
- customer-specific branding
Article variants
I.D.
(in / mm)
(in / mm)
outer Ø
(in)
(in)
Pressure
(psi)
(psi)
Vacuum
(inHG)
(inHG)
Bending
radius
(in)
radius
(in)
Weight
(lb/ft)
(lb/ft)
Dimensions
in Stock
(ft)
in Stock
(ft)
Production
lengths
(ft)
lengths
(ft)
Order No.
Further Article Details
I.D. (in / mm)
4 / 100
outer Ø (in)
4.843
Pressure (psi)
43.730
Vacuum (inHG)
29.530
Bending radius (in)
21.654
Weight (lb/ft)
2.500
Dimensions in Stock (ft)
25
Production lengths (ft)
10
Further Article Details
I.D. (in / mm)
5 / 127
outer Ø (in)
5.827
Pressure (psi)
35.462
Vacuum (inHG)
27.463
Bending radius (in)
26.457
Weight (lb/ft)
3.044
Dimensions in Stock (ft)
25
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
6 / 152
outer Ø (in)
6.890
Pressure (psi)
29.806
Vacuum (inHG)
22.886
Bending radius (in)
38.346
Weight (lb/ft)
3.595
Dimensions in Stock (ft)
25
Production lengths (ft)
-
Further Article Details
I.D. (in / mm)
8 / 200
outer Ø (in)
8.780
Pressure (psi)
22.626
Vacuum (inHG)
20.671
Bending radius (in)
57.087
Weight (lb/ft)
5.128
Dimensions in Stock (ft)
25
Production lengths (ft)
5
Further Article Details
I.D. (in / mm)
- / 250
outer Ø (in)
10.748
Pressure (psi)
18.203
Vacuum (inHG)
16.537
Bending radius (in)
73.819
Weight (lb/ft)
6.337
Dimensions in Stock (ft)
25
Production lengths (ft)
5
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.
Accessories
CLAMP 211
T-bolt clamp for attaching heavy-duty hoses with a smooth exterior surface
To the product
CONNECT 244
2-part loose flange to fit mating flanges acc. to DIN 2632/2633, hole pattern DIN-EN 1092-1
To the product
CONNECT STORZ DIN ALU 251
Storz suction coupling
To the product
CONNECT KAMLOK ALU 253
Kamlok coupling
To the product
CONNECT KARDAN 254
Kardan coupling
To the product