us

AIRDUC® PUR 350 AS BLACK (MD)

Permanently antistatic
AIRDUC_PUR_350_AS_BLACK_(MD)_main.jpg
AIRDUC_PUR_350_AS_BLACK_(MD)_main.jpg Design
Antistatic polyurethane hose, medium-heavy duty, black
Gas + Dust + Liquid Pre-PUR® Abrasion-resistant Smooth interior Antistatic and electrically conductive hoses Special wire adhesion Cut lengths
Request
Datasheet
Product details Article variants Documents Accessories

Product details

Application

  • flexible hose/ ducting for abrasive powder, bulk material, granulate and for gases
  • air supply: UV dryer, IR dryer
  • extraction unit, dust collection systems, filter system, oil mist extraction
  • explosion hazard area
  • textile industry, fiber extraction: spinning machine, knitting machine, weaving loom machine
  • clean room ventilation, semiconductor production machine
  • heating hose: exterior hose as protection hose
  • surface preparation: shot blasting/ sand blasting recovery (blasting chamber), ship yard, stripping machine, flooring preparation machine, grinding machine

Properties

  • medium-heavy duty
  • highly abrasion resistant
  • good resistance to oil, gasoline, and chemicals
  • very good low temperature flexibility
  • Permanently antistatic wall: according to ISO 8031 electrical and surface resistance <10⁹ Ω (according to TRGS 727 <2,5*10⁸ Ω*m and NFPA 652 10⁸-10⁹ Ω)
  • in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: pneumatic transport of flammable dusts and bulk materials (Zone 20, 21, 22 inside), aspiration of combustible dusts (Zone 22 inside),
  • in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: for conveying for flammable liquids (inside zone 0, 1, 2), for conveying for non-flammable liquids, for use in zone 1 and 2 (gases), for use in zone 0 (gases)
  • according to DIN 26057 Type 2
  • conforms to RoHS guideline
  • REACH according to --> Technology / Technical Information / REACH

Temperature range

  • -40°F to 195°F
  • short time to 255°F

Design

  • AIRDUC® profile hose
  • 1. spring steel wire firmly embedded in wall
  • 2. wall: permanently antistatic premium ester-polyurethane (Pre-PUR®)
  • 3. wall thickness 0.0275 in approx.

Delivery variants

  • further diameters and lengths available on request
  • black (standard)
  • special colors: full colored
  • customer-specific branding

Article variants

I.D.


(in / mm)
outer Ø


(in)
Pressure
DIN 26057
(50% Elongation)
(psi)
Vacuum
DIN 26057
(axially fixed)
(inHG)
Bending
radius

(in)
Weight


(lb/ft)
Dimensions
in Stock

(ft)
Order No.
- / 40
1.850
22.554 (50.184)
13.879 (29.530)
1.260
0.222
50
350-0040-3030
Further Article Details
I.D. (in / mm)
- / 40
outer Ø (in)
1.850
Pressure DIN 26057 (50% Elongation) (psi)
22.554 (50.184)
Vacuum DIN 26057 (axially fixed) (inHG)
13.879 (29.530)
Bending radius (in)
1.260
Weight (lb/ft)
0.222
Dimensions in Stock (ft)
50
2 / 50-51
2.244
18.130 (40.321)
11.221 (29.530)
1.496
0.269
50
350-0050-3030
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (in)
2.244
Pressure DIN 26057 (50% Elongation) (psi)
18.130 (40.321)
Vacuum DIN 26057 (axially fixed) (inHG)
11.221 (29.530)
Bending radius (in)
1.496
Weight (lb/ft)
0.269
Dimensions in Stock (ft)
50
2,36 / 60
2.638
15.229 (33.794)
9.302 (24.510)
1.732
0.323
50
350-0060-3030
Further Article Details
I.D. (in / mm)
2,36 / 60
outer Ø (in)
2.638
Pressure DIN 26057 (50% Elongation) (psi)
15.229 (33.794)
Vacuum DIN 26057 (axially fixed) (inHG)
9.302 (24.510)
Bending radius (in)
1.732
Weight (lb/ft)
0.323
Dimensions in Stock (ft)
50
- / 70
3.031
13.054 (29.008)
5.463 (24.510)
1.969
0.376
50
350-0070-3030
Further Article Details
I.D. (in / mm)
- / 70
outer Ø (in)
3.031
Pressure DIN 26057 (50% Elongation) (psi)
13.054 (29.008)
Vacuum DIN 26057 (axially fixed) (inHG)
5.463 (24.510)
Bending radius (in)
1.969
Weight (lb/ft)
0.376
Dimensions in Stock (ft)
50
3 / 75-76
3.228
12.183 (27.122)
5.168 (21.262)
2.087
0.397
50
350-0075-3030
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (in)
3.228
Pressure DIN 26057 (50% Elongation) (psi)
12.183 (27.122)
Vacuum DIN 26057 (axially fixed) (inHG)
5.168 (21.262)
Bending radius (in)
2.087
Weight (lb/ft)
0.397
Dimensions in Stock (ft)
50
- / 80
3.425
11.458 (25.382)
4.725 (18.899)
2.205
0.430
50
350-0080-3030
Further Article Details
I.D. (in / mm)
- / 80
outer Ø (in)
3.425
Pressure DIN 26057 (50% Elongation) (psi)
11.458 (25.382)
Vacuum DIN 26057 (axially fixed) (inHG)
4.725 (18.899)
Bending radius (in)
2.205
Weight (lb/ft)
0.430
Dimensions in Stock (ft)
50
4 / 100-102
4.213
9.210 (20.451)
3.987 (19.490)
2.677
0.538
50
350-0100-3030
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (in)
4.213
Pressure DIN 26057 (50% Elongation) (psi)
9.210 (20.451)
Vacuum DIN 26057 (axially fixed) (inHG)
3.987 (19.490)
Bending radius (in)
2.677
Weight (lb/ft)
0.538
Dimensions in Stock (ft)
50
4,72 / 120
5.000
7.687 (16.970)
3.396 (13.584)
3.150
0.638
50
350-0120-3030
Further Article Details
I.D. (in / mm)
4,72 / 120
outer Ø (in)
5.000
Pressure DIN 26057 (50% Elongation) (psi)
7.687 (16.970)
Vacuum DIN 26057 (axially fixed) (inHG)
3.396 (13.584)
Bending radius (in)
3.150
Weight (lb/ft)
0.638
Dimensions in Stock (ft)
50
5 / 125-127
5.197
7.397 (16.390)
3.248 (12.403)
3.268
0.659
50
350-0125-3030
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (in)
5.197
Pressure DIN 26057 (50% Elongation) (psi)
7.397 (16.390)
Vacuum DIN 26057 (axially fixed) (inHG)
3.248 (12.403)
Bending radius (in)
3.268
Weight (lb/ft)
0.659
Dimensions in Stock (ft)
50
5,5 / 140
5.787
6.599 (14.649)
2.805 (9.745)
3.622
0.733
50
350-0140-3030
Further Article Details
I.D. (in / mm)
5,5 / 140
outer Ø (in)
5.787
Pressure DIN 26057 (50% Elongation) (psi)
6.599 (14.649)
Vacuum DIN 26057 (axially fixed) (inHG)
2.805 (9.745)
Bending radius (in)
3.622
Weight (lb/ft)
0.733
Dimensions in Stock (ft)
50
6 / 150-152
6.181
6.164 (13.634)
2.215 (10.631)
3.858
0.941
50
350-0150-3030
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (in)
6.181
Pressure DIN 26057 (50% Elongation) (psi)
6.164 (13.634)
Vacuum DIN 26057 (axially fixed) (inHG)
2.215 (10.631)
Bending radius (in)
3.858
Weight (lb/ft)
0.941
Dimensions in Stock (ft)
50
6,3 / 160
6.575
5.802 (12.764)
2.067 (9.154)
4.094
1.008
50
350-0160-3030
Further Article Details
I.D. (in / mm)
6,3 / 160
outer Ø (in)
6.575
Pressure DIN 26057 (50% Elongation) (psi)
5.802 (12.764)
Vacuum DIN 26057 (axially fixed) (inHG)
2.067 (9.154)
Bending radius (in)
4.094
Weight (lb/ft)
1.008
Dimensions in Stock (ft)
50
8 / 200-203
8.150
4.641 (10.298)
1.624 (5.611)
5.039
1.250
50
350-0200-3030
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (in)
8.150
Pressure DIN 26057 (50% Elongation) (psi)
4.641 (10.298)
Vacuum DIN 26057 (axially fixed) (inHG)
1.624 (5.611)
Bending radius (in)
5.039
Weight (lb/ft)
1.250
Dimensions in Stock (ft)
50
- / 250
10.118
3.699 (8.267)
1.329 (3.544)
6.220
1.552
50
350-0250-3030
Further Article Details
I.D. (in / mm)
- / 250
outer Ø (in)
10.118
Pressure DIN 26057 (50% Elongation) (psi)
3.699 (8.267)
Vacuum DIN 26057 (axially fixed) (inHG)
1.329 (3.544)
Bending radius (in)
6.220
Weight (lb/ft)
1.552
Dimensions in Stock (ft)
50
- / 300
12.087
3.118 (6.817)
1.034 (2.362)
7.402
1.862
50
350-0300-3030
Further Article Details
I.D. (in / mm)
- / 300
outer Ø (in)
12.087
Pressure DIN 26057 (50% Elongation) (psi)
3.118 (6.817)
Vacuum DIN 26057 (axially fixed) (inHG)
1.034 (2.362)
Bending radius (in)
7.402
Weight (lb/ft)
1.862
Dimensions in Stock (ft)
50
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.

Documents

TRGS 727 / ATEX Test report / manufacturer (93.64 KB) Montagehinweis / Assembly Information (384.89 KB) Verlegerichtlinien / Installation guidelines (201.24 KB) TRGS 727 / ATEX Zertifikat / certificate (1.28 MB)

Accessories

CLAMP 210 BRIDGE CLAMP
Clamp with plastic bridge for attaching externally corrugated spiral hoses
To the product
CLAMP 212
Bridge clamp for attaching externally corrugated spiral hoses
To the product
CLAMP 213
Bridge Clamp with quick-release closure for attaching externally corrugated spiral hoses
To the product
CLAMP 217
Bridge clamp with eyelet for attaching externally corrugated spiral hoses
To the product
CONNECT 223
Shrink sleeve for connecting one hose to another or to an adapter
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT MOULD ASSEMBLY 233
Potted coupling system incl. assembly
To the product
CONNECT THREAD FITTING 234
Threaded adapter
To the product
CONNECT 240 + 241 AS
Soft sleeve to slide onto connectors or push into pipes
To the product
CONNECT 240 EC
Soft sleeve to slide onto connectors or push into pipes, electrically conductive
To the product
CONNECT 242
Threaded adapter
To the product
CONNECT 243
Flanged pipe according to the popular pipe systems in the ventilation field (for example Jacob-Standard)
To the product
CONNECT 244
2-part loose flange to fit mating flanges acc. to DIN 2632/2633, hole pattern DIN-EN 1092-1
To the product
CONNECT TRI-CLAMP FITTING 245
TRI clamp adapters based on DIN 32676 and ISO 2852
To the product
CONNECT 245
TRI-Clamp coupling to fit adapter acc. to DIN 32676
To the product
CONNECT 246 AS
Spiral hose connector for connecting, lengthening or repairing spiral hoses
To the product
CONNECT DAIRY FITTING 247
Dairy tube support based on DIN 2826/11851
To the product
CONNECT ASEPTIC FITTING 249
Aseptic adapters based in DIN 11864-1 / DIN 11864-3
To the product
CONNECT 270-271
Metal hose connector / reducer
To the product