us

AIRDUC® PUR 355 EC (HD)

AIRDUC_PUR_355_EC_(HD)_main.jpg
AIRDUC_PUR_355_EC_(HD)_main.jpg design
Electrically conductive polyurethane hose, heavy duty
Gas + Dust + Liquid + Solids Pre-PUR® Abrasion-resistant Smooth interior Antistatic and electrically conductive hoses Special wire adhesion Cut lengths
Request
Datasheet
Product details Article variants Documents Accessories

Product details

Application

  • flexible hose/ ducting for high volume of abrasive powder, bulk material, granulate and for gases
  • industrial vacuum cleaners, vacuum cleaners
  • Coal mine, mine, tunnelling: ventilation, methane extraction
  • raw material conveying hose for powders, granulates, sand, quartz, gravel, shards and chips/ shavings

Properties

  • heavy duty
  • increased pressure and vacuum resistance
  • highly abrasion resistant
  • very good low temperature flexibility
  • good resistance to oil, gasoline, and chemicals
  • electrically conductive wall: electrical and surface resistance <10³ Ω (according to NFPA 652 <10⁶ Ω)
  • in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: pneumatic transport of flammable dusts and bulk materials (Zone 20, 21, 22 inside), aspiration of combustible dusts (Zone 22 inside),
  • in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: for conveying for flammable liquids (inside zone 0, 1, 2), for conveying for non-flammable liquids, for use in zone 1 and 2 (gases), for use in zone 0 (gases)
  • according to DIN 26057 Type 3
  • conforms to RoHS guideline
  • REACH according to --> Technology / Technical Information / REACH

Temperature range

  • -40°F to 195°F

Design

  • AIRDUC® profile hose
  • 1. spring steel wire firmly embedded in wall
  • 2. wall: electrically conductive premium ester-polyurethane (Pre-PUR®)
  • 3. wall thickness 0.055 to 0.06 in approx.

Delivery variants

  • further diameters and lengths available on request
  • black (standard)
  • customer-specific branding

Article variants

I.D.


(in / mm)
outer Ø


(in)
Pressure
DIN 26057
(50% Elongation)
(psi)
Vacuum
DIN 26057
(axially fixed)
(inHG)
Bending
radius

(in)
Weight


(lb/ft)
Dimensions
in Stock

(ft)
Production
lengths

(ft)
Order No.
1 / 25
1.260
42.497 (68.749)
29.530 (29.530)
0.787
0.188
25 50
-
355-0025-1003
Further Article Details
I.D. (in / mm)
1 / 25
outer Ø (in)
1.260
Pressure DIN 26057 (50% Elongation) (psi)
42.497 (68.749)
Vacuum DIN 26057 (axially fixed) (inHG)
29.530 (29.530)
Bending radius (in)
0.787
Weight (lb/ft)
0.188
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
- / 30
1.575
35.825 (57.871)
29.530 (29.530)
0.984
0.316
-
25 50
355-0030-1003
Further Article Details
I.D. (in / mm)
- / 30
outer Ø (in)
1.575
Pressure DIN 26057 (50% Elongation) (psi)
35.825 (57.871)
Vacuum DIN 26057 (axially fixed) (inHG)
29.530 (29.530)
Bending radius (in)
0.984
Weight (lb/ft)
0.316
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
1,25 / 32
1.654
33.722 (54.390)
28.054 (29.530)
1.024
0.316
-
25 50
355-0032-1003
Further Article Details
I.D. (in / mm)
1,25 / 32
outer Ø (in)
1.654
Pressure DIN 26057 (50% Elongation) (psi)
33.722 (54.390)
Vacuum DIN 26057 (axially fixed) (inHG)
28.054 (29.530)
Bending radius (in)
1.024
Weight (lb/ft)
0.316
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
1,5 / 38
1.890
28.645 (46.268)
27.020 (29.530)
1.142
0.370
25 50
-
355-0038-1003
Further Article Details
I.D. (in / mm)
1,5 / 38
outer Ø (in)
1.890
Pressure DIN 26057 (50% Elongation) (psi)
28.645 (46.268)
Vacuum DIN 26057 (axially fixed) (inHG)
27.020 (29.530)
Bending radius (in)
1.142
Weight (lb/ft)
0.370
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
- / 40
1.969
27.268 (43.947)
26.725 (29.530)
1.181
0.383
-
25 50
355-0040-1003
Further Article Details
I.D. (in / mm)
- / 40
outer Ø (in)
1.969
Pressure DIN 26057 (50% Elongation) (psi)
27.268 (43.947)
Vacuum DIN 26057 (axially fixed) (inHG)
26.725 (29.530)
Bending radius (in)
1.181
Weight (lb/ft)
0.383
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
2 / 50-51
2.362
21.974 (35.535)
23.122 (29.530)
1.378
0.477
25 50
-
355-0050-1003
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (in)
2.362
Pressure DIN 26057 (50% Elongation) (psi)
21.974 (35.535)
Vacuum DIN 26057 (axially fixed) (inHG)
23.122 (29.530)
Bending radius (in)
1.378
Weight (lb/ft)
0.477
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
- / 55
2.559
20.088 (32.344)
21.025 (29.530)
1.496
0.517
-
25 50
355-0055-1003
Further Article Details
I.D. (in / mm)
- / 55
outer Ø (in)
2.559
Pressure DIN 26057 (50% Elongation) (psi)
20.088 (32.344)
Vacuum DIN 26057 (axially fixed) (inHG)
21.025 (29.530)
Bending radius (in)
1.496
Weight (lb/ft)
0.517
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
2,36 / 60
2.756
18.420 (29.733)
19.195 (29.530)
1.575
0.558
-
25 50
355-0060-1003
Further Article Details
I.D. (in / mm)
2,36 / 60
outer Ø (in)
2.756
Pressure DIN 26057 (50% Elongation) (psi)
18.420 (29.733)
Vacuum DIN 26057 (axially fixed) (inHG)
19.195 (29.530)
Bending radius (in)
1.575
Weight (lb/ft)
0.558
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
2,5 / 63-65
2.953
17.042 (27.558)
17.807 (29.530)
1.693
0.598
25 50
-
355-0065-1003
Further Article Details
I.D. (in / mm)
2,5 / 63-65
outer Ø (in)
2.953
Pressure DIN 26057 (50% Elongation) (psi)
17.042 (27.558)
Vacuum DIN 26057 (axially fixed) (inHG)
17.807 (29.530)
Bending radius (in)
1.693
Weight (lb/ft)
0.598
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
- / 70
3.189
21.974 (35.535)
15.149 (29.530)
2.441
0.679
-
-
355-0070-1003
Further Article Details
I.D. (in / mm)
- / 70
outer Ø (in)
3.189
Pressure DIN 26057 (50% Elongation) (psi)
21.974 (35.535)
Vacuum DIN 26057 (axially fixed) (inHG)
15.149 (29.530)
Bending radius (in)
2.441
Weight (lb/ft)
0.679
Dimensions in Stock (ft)
-
Production lengths (ft)
-
3 / 75-76
3.386
20.596 (33.214)
14.145 (29.530)
2.598
0.719
25 50
-
355-0075-1003
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (in)
3.386
Pressure DIN 26057 (50% Elongation) (psi)
20.596 (33.214)
Vacuum DIN 26057 (axially fixed) (inHG)
14.145 (29.530)
Bending radius (in)
2.598
Weight (lb/ft)
0.719
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
- / 80
3.583
19.363 (31.184)
13.318 (29.530)
2.717
0.766
-
25 50
355-0080-1003
Further Article Details
I.D. (in / mm)
- / 80
outer Ø (in)
3.583
Pressure DIN 26057 (50% Elongation) (psi)
19.363 (31.184)
Vacuum DIN 26057 (axially fixed) (inHG)
13.318 (29.530)
Bending radius (in)
2.717
Weight (lb/ft)
0.766
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
3,5 / 89-90
3.976
17.260 (27.848)
5.758 (29.530)
2.992
0.853
25 50
-
355-0090-1003
Further Article Details
I.D. (in / mm)
3,5 / 89-90
outer Ø (in)
3.976
Pressure DIN 26057 (50% Elongation) (psi)
17.260 (27.848)
Vacuum DIN 26057 (axially fixed) (inHG)
5.758 (29.530)
Bending radius (in)
2.992
Weight (lb/ft)
0.853
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
4 / 100
4.370
15.592 (25.092)
10.926 (27.758)
3.268
0.948
25 50
-
355-0100-1003
Further Article Details
I.D. (in / mm)
4 / 100
outer Ø (in)
4.370
Pressure DIN 26057 (50% Elongation) (psi)
15.592 (25.092)
Vacuum DIN 26057 (axially fixed) (inHG)
10.926 (27.758)
Bending radius (in)
3.268
Weight (lb/ft)
0.948
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
- / 110
4.764
14.214 (22.916)
9.450 (22.738)
3.543
1.035
-
25 50
355-0110-1003
Further Article Details
I.D. (in / mm)
- / 110
outer Ø (in)
4.764
Pressure DIN 26057 (50% Elongation) (psi)
14.214 (22.916)
Vacuum DIN 26057 (axially fixed) (inHG)
9.450 (22.738)
Bending radius (in)
3.543
Weight (lb/ft)
1.035
Dimensions in Stock (ft)
-
Production lengths (ft)
25 50
4,5 / 114-115
4.961
13.561 (21.901)
9.538 (20.671)
3.701
1.082
25 50
-
355-0115-1003
Further Article Details
I.D. (in / mm)
4,5 / 114-115
outer Ø (in)
4.961
Pressure DIN 26057 (50% Elongation) (psi)
13.561 (21.901)
Vacuum DIN 26057 (axially fixed) (inHG)
9.538 (20.671)
Bending radius (in)
3.701
Weight (lb/ft)
1.082
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
5 / 125-127
5.354
12.546 (20.161)
8.564 (16.832)
3.976
1.169
25 50
-
355-0125-1003
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (in)
5.354
Pressure DIN 26057 (50% Elongation) (psi)
12.546 (20.161)
Vacuum DIN 26057 (axially fixed) (inHG)
8.564 (16.832)
Bending radius (in)
3.976
Weight (lb/ft)
1.169
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
6 / 150-152
6.339
10.443 (16.825)
3.839 (16.242)
4.646
1.539
25 50
-
355-0150-1003
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (in)
6.339
Pressure DIN 26057 (50% Elongation) (psi)
10.443 (16.825)
Vacuum DIN 26057 (axially fixed) (inHG)
3.839 (16.242)
Bending radius (in)
4.646
Weight (lb/ft)
1.539
Dimensions in Stock (ft)
25 50
Production lengths (ft)
-
8 / 200
8.346
7.325 (11.748)
4.193 (10.040)
6.102
1.915
25
-
355-0200-1003
Further Article Details
I.D. (in / mm)
8 / 200
outer Ø (in)
8.346
Pressure DIN 26057 (50% Elongation) (psi)
7.325 (11.748)
Vacuum DIN 26057 (axially fixed) (inHG)
4.193 (10.040)
Bending radius (in)
6.102
Weight (lb/ft)
1.915
Dimensions in Stock (ft)
25
Production lengths (ft)
-
- / 300
12.323
4.931 (7.832)
2.510 (5.611)
8.898
2.903
-
25
355-0300-1003
Further Article Details
I.D. (in / mm)
- / 300
outer Ø (in)
12.323
Pressure DIN 26057 (50% Elongation) (psi)
4.931 (7.832)
Vacuum DIN 26057 (axially fixed) (inHG)
2.510 (5.611)
Bending radius (in)
8.898
Weight (lb/ft)
2.903
Dimensions in Stock (ft)
-
Production lengths (ft)
25
- / 315
12.913
4.641 (7.542)
2.067 (7.383)
9.331
3.118
-
25
355-0315-1003
Further Article Details
I.D. (in / mm)
- / 315
outer Ø (in)
12.913
Pressure DIN 26057 (50% Elongation) (psi)
4.641 (7.542)
Vacuum DIN 26057 (axially fixed) (inHG)
2.067 (7.383)
Bending radius (in)
9.331
Weight (lb/ft)
3.118
Dimensions in Stock (ft)
-
Production lengths (ft)
25
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.

Documents

TRGS 727 / ATEX Test report / manufacturer (93.64 KB) Montagehinweis / Assembly Information (384.89 KB) Verlegerichtlinien / Installation guidelines (201.24 KB) TRGS 727 / ATEX Zertifikat / certificate (1.28 MB)

Accessories

CLAMP 212
Bridge clamp for attaching externally corrugated spiral hoses
To the product
CLAMP 212 EC
Bridge Clamp with integral grounding (via earth strip) for attaching externally corrugated spiral hoses
To the product
CLAMP 213
Bridge Clamp with quick-release closure for attaching externally corrugated spiral hoses
To the product
CLAMP 216
Hose Clamp for watertight attachment of heavy, externally corrugated spiral hoses
To the product
CLAMP 217
Bridge clamp with eyelet for attaching externally corrugated spiral hoses
To the product
CONNECT 223
Shrink sleeve for connecting one hose to another or to an adapter
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT SAFETY CLAMP ASSEMBLY 231
Universal safety clamp coupling system incl. assembly if appropriate
To the product
CONNECT PRESS ASSEMBLY 232
Crimped coupling system incl. assembly
To the product
CONNECT MOULD ASSEMBLY 233
Potted coupling system incl. assembly
To the product
CONNECT THREAD FITTING 234
Threaded adapter
To the product
CONNECT 240 + 241 AS
Soft sleeve to slide onto connectors or push into pipes
To the product
CONNECT 240 EC
Soft sleeve to slide onto connectors or push into pipes, electrically conductive
To the product
CONNECT 242
Threaded adapter
To the product
CONNECT 243
Flanged pipe according to the popular pipe systems in the ventilation field (for example Jacob-Standard)
To the product
CONNECT 244
2-part loose flange to fit mating flanges acc. to DIN 2632/2633, hole pattern DIN-EN 1092-1
To the product
CONNECT 245
TRI-Clamp coupling to fit adapter acc. to DIN 32676
To the product
CONNECT 246 AS
Spiral hose connector for connecting, lengthening or repairing spiral hoses
To the product
CONNECT 270-271
Metal hose connector / reducer
To the product