us

CP HYP 450 PROTECT

CP_HYP_450_PROTECT_main.jpg
CP_HYP_450_PROTECT_main.jpg design
Exhaust gas hose, vibration resistant, outer protection profile
Gas High flexibility Partially coloured Cut lengths 48 hour shipment service
Request
Datasheet
Product details Article variants Documents Accessories

Product details

Application

  • flexible hose/ ducting for hot gases
  • vehicle/ car gas exhaust system, gas extraction: hose reel, slotted floor channel, underfloor extraction system
  • engine test bench, exhaust gas measurement

Properties

  • outer protection profile made of elasticized material
  • abrasion protection via external clamp profile
  • secure clamping of the wall within the clamp profile
  • highly flexible + compressible
  • vibration resistant
  • very good heat resistance
  • good resistance to chemicals
  • 1 clamp-cover band and 2 end-caps included
  • conforms to RoHS guideline
  • REACH according to --> Technology / Technical Information / REACH

Temperature range

  • exhaust gas temperatures to 390°F *
  • * when correctly applied with exhaust gas funnels and sufficient fresh air supply (50% approximate).

Design

  • CP construction
  • 1. Clamp profile supporting spiral: galvanised steel
  • 2. wall: CSM coated polyester fabric
  • 3. firmly clamped, shock-absorbing, anti-abrasion profile made from elasticised, high-temperature plastic

Delivery variants

  • further diameters and lengths available on request
  • special colors: colored spiral
  • stainless steel (INOX) clamp profile

Article variants

I.D.


(in / mm)
outer Ø


(in)
Pressure


(psi)
Vacuum


(inHG)
Bending
radius

(in)
Weight


(lb/ft)
Dimensions
in Stock

(ft)
Order No.
3 / 75-76
3.504
7.252
6.792
1.890
0.672
12.5 25
450-0075-7500
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (in)
3.504
Pressure (psi)
7.252
Vacuum (inHG)
6.792
Bending radius (in)
1.890
Weight (lb/ft)
0.672
Dimensions in Stock (ft)
12.5 25
- / 80
3.701
7.034
5.906
1.929
0.712
-
450-0080-7500
Further Article Details
I.D. (in / mm)
- / 80
outer Ø (in)
3.701
Pressure (psi)
7.034
Vacuum (inHG)
5.906
Bending radius (in)
1.929
Weight (lb/ft)
0.712
Dimensions in Stock (ft)
-
4 / 100-102
4.488
4.351
3.544
2.283
0.692
12.5 15 20 25 30 40 50
450-0100-7500
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (in)
4.488
Pressure (psi)
4.351
Vacuum (inHG)
3.544
Bending radius (in)
2.283
Weight (lb/ft)
0.692
Dimensions in Stock (ft)
12.5 15 20 25 30 40 50
5 / 125-127
5.472
3.771
2.510
2.756
0.853
12.5 15 20 25 30 40 50
450-0125-7500
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (in)
5.472
Pressure (psi)
3.771
Vacuum (inHG)
2.510
Bending radius (in)
2.756
Weight (lb/ft)
0.853
Dimensions in Stock (ft)
12.5 15 20 25 30 40 50
6 / 150-152
6.457
2.393
1.477
3.189
0.853
12.5 15 20 25 30 40 50
450-0150-7500
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (in)
6.457
Pressure (psi)
2.393
Vacuum (inHG)
1.477
Bending radius (in)
3.189
Weight (lb/ft)
0.853
Dimensions in Stock (ft)
12.5 15 20 25 30 40 50
8 / 200-203
8.425
2.031
0.886
4.055
1.048
12.5 15 20 25 30 40 50
450-0200-7500
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (in)
8.425
Pressure (psi)
2.031
Vacuum (inHG)
0.886
Bending radius (in)
4.055
Weight (lb/ft)
1.048
Dimensions in Stock (ft)
12.5 15 20 25 30 40 50
- / 250
10.394
1.450
0.591
4.921
1.304
-
450-0250-7500
Further Article Details
I.D. (in / mm)
- / 250
outer Ø (in)
10.394
Pressure (psi)
1.450
Vacuum (inHG)
0.591
Bending radius (in)
4.921
Weight (lb/ft)
1.304
Dimensions in Stock (ft)
-
10 / 254
10.551
1.378
0.591
5.118
1.344
12.5 15 20 25 30 40 50
450-0254-7500
Further Article Details
I.D. (in / mm)
10 / 254
outer Ø (in)
10.551
Pressure (psi)
1.378
Vacuum (inHG)
0.591
Bending radius (in)
5.118
Weight (lb/ft)
1.344
Dimensions in Stock (ft)
12.5 15 20 25 30 40 50
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.

Documents

Verlegerichtlinien / Installation guidelines (201.24 KB)

Accessories

CLAMP 212
Bridge clamp for attaching externally corrugated spiral hoses
To the product
CLAMP 213
Bridge Clamp with quick-release closure for attaching externally corrugated spiral hoses
To the product
CLAMP 217
Bridge clamp with eyelet for attaching externally corrugated spiral hoses
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT 270-271
Metal hose connector / reducer
To the product