us

CONNECT 683

picture
picture
Seal for assembly of adapter bodies
Request
Datasheet
Product details Article variants

Product details

Application

  • membrane tube diffusor, for industrial and municipal wastewater treatment plant, pressure diffusion with fine bubbles, oxygen input for nitrication in activation basins, permanent and intermittend ventilation
  • oxygen input and circulation in xed-bed and bioreactors, thorough mixing of activation basins, sand trap louvre ventilation, renaturation of lakes and rivers, aquacultures, sh farming

Properties

  • conforms to RoHS guideline

Design

  • wall: EPDM

Article variants

I.D.


(mm)
outer Ø


(in)
Weight


(lb/pcs)
Wall
thickness

(in)
Order No.
1.516
2.559
0.013
0.118
683-0040-2760
Further Article Details
I.D. (mm)
1.516
outer Ø (in)
2.559
Weight (lb/pcs)
0.013
Wall thickness (in)
0.118
1.732
2.559
0.011
0.118
683-0045-2760
Further Article Details
I.D. (mm)
1.732
outer Ø (in)
2.559
Weight (lb/pcs)
0.011
Wall thickness (in)
0.118
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.