CLAMP 216

Hose Clamp for watertight attachment of heavy, externally corrugated spiral hoses

Product details

Properties

  • watertight and tensile connection at very low overpressure due to special spiral geometry
  • easily and quickly fitted
  • re-usable
  • conforms to RoHS guideline
  • REACH according to --> Technology / Technical Information / REACH

Design

  • Quality: W2; Clamp strip: stainless steel 1.4016 = AISI 430; Clamp wire: stainless steel 1.4310 = AISI 301 (INOX); Screw: chromated steel; Body: stainless steel 1.4016 = AISI 430

Delivery variants

  • further diameters available on request

Suitable for hose

  • AIRDUC®: 345; 355 + 356 (AS/ FOOD / INOX FOOD-AS / HT / EC)

Article variants

Suitable for
hose I.D.

(in)
Order No.
Sealing clamp for AIRDUC® 356 hoses with an inner Ø of < 1.97 in
Further Article Details
Suitable for hose I.D. (in)
32
Further Article Details
Suitable for hose I.D. (in)
38
Further Article Details
Suitable for hose I.D. (in)
40
Further Article Details
Suitable for hose I.D. (in)
45
Sealing clamp for AIRDUC® 345, 355,hoses with an inner Ø of < 1.97 in
Further Article Details
Suitable for hose I.D. (in)
32
Further Article Details
Suitable for hose I.D. (in)
38
Further Article Details
Suitable for hose I.D. (in)
40
Further Article Details
Suitable for hose I.D. (in)
45
Sealing clamp for AIRDUC® 345, 355, 356 hoses with an inner Ø of >= 1.97 in
Further Article Details
Suitable for hose I.D. (in)
50
Further Article Details
Suitable for hose I.D. (in)
55
Further Article Details
Suitable for hose I.D. (in)
60
Further Article Details
Suitable for hose I.D. (in)
65
Further Article Details
Suitable for hose I.D. (in)
70
Further Article Details
Suitable for hose I.D. (in)
75
Further Article Details
Suitable for hose I.D. (in)
80
Further Article Details
Suitable for hose I.D. (in)
90
Further Article Details
Suitable for hose I.D. (in)
100
Further Article Details
Suitable for hose I.D. (in)
102
Further Article Details
Suitable for hose I.D. (in)
110
Further Article Details
Suitable for hose I.D. (in)
115
Further Article Details
Suitable for hose I.D. (in)
120
Further Article Details
Suitable for hose I.D. (in)
125
Further Article Details
Suitable for hose I.D. (in)
127
Further Article Details
Suitable for hose I.D. (in)
130
Further Article Details
Suitable for hose I.D. (in)
140
Further Article Details
Suitable for hose I.D. (in)
150
Further Article Details
Suitable for hose I.D. (in)
152
Further Article Details
Suitable for hose I.D. (in)
160
Further Article Details
Suitable for hose I.D. (in)
175
Further Article Details
Suitable for hose I.D. (in)
180
Further Article Details
Suitable for hose I.D. (in)
200
Further Article Details
Suitable for hose I.D. (in)
225
Further Article Details
Suitable for hose I.D. (in)
250
Further Article Details
Suitable for hose I.D. (in)
300
Positive and negative pressure ratings are the recommended maximum operating values. Products can be manufactured to meet higher operating values upon request. The bend radius is calculated from the center of the hose in an arched position. Additional information at www.norres.com/us/technology/. NORRES reserves the right to modify technical data at any time. Technical data based on tests at 68°F and are approx. values. Proper use and maintenance of NORRES hoses is the sole responsibility of purchaser and ultimate user of the product. The individual conditions, applications and the number of variables make firm recommendations technically impossible. This information is intended as a general guide only.

Accessories