.svg){kind=logo}
Hoses for surface preparation
In this section, we would like to assist you with the selection of the appropriate hose for shot blasting / sand blasting recovery. In the following, we have compiled an initial selection of the most suitable hoses from our range for the recovery of shot and sand blasting. All of the products listed here are suitable for use on blasting chambers, floor preparation machines, grinding machines and similar surface preparation machines. For further information about our range of hoses for surface preparation see below.
Filter
Application
Brand
Temp. min. (°F)
Temp. max. (°F)
PROTAPE® PUR 330 AS (LD)
Antistatic polyurethane hose, light weight, microbe resistant + flame-resistant
Overview
- highly abrasion resistant suction hose + pressure hose, multi purpose hose + universal hose
- antistatic < 10⁹
- Wall thickness 0.025 in approx.
- -40°F to +195°F (+255°F)
To the product
PROTAPE® PUR 333 AS (MD)
Antistatic polyurethane hose, medium-heavy duty, microbe resistant
Overview
- highly abrasion resistant suction hose + pressure hose, multi purpose hose + universal hose
- antistatic approx. 10⁹ Ω
- Wall thickness 0.04 inch
- -40°F to +195°F (+255°F)
To the product
AIRDUC® PUR 350 AS (MD)
Antistatic polyurethane hose, medium-heavy duty, microbe resistant, flame-resistant
Overview
- highly abrasion resistant suction hose + pressure hose, multi purpose hose + universal hose
- antistatic < 10⁹
- Wall thickness 0.0275 inch approx.
- -40°F to +195°F (+255°F)
To the product
AIRDUC® PUR 355 AS (HD)
Antistatic polyurethane hose, heavy duty, microbe resistant, flame-resistant
Overview
- highly abrasion resistant suction hose + pressure hose, multi purpose hose + universal hose
- antistatic < 10⁹
- Wall thickness 0.06 inch
- -40°F to +195°F (+255°F)
To the product
AIRDUC® PUR 356 AS (XHD)
Antistatic polyurethane hose, super-heavy duty, microbe resistant
Overview
- extremely abrasion resistant suction hose + pressure hose, multi purpose hose + universal hose
- antistatic < 10⁹
- Wall thickness 0.08 - 0.1 inch
- -40°F to +195°F (+255°F)
To the product
AIRDUC® PUR 351 FOOD (MD)
Food hose and pharmaceutical hose, medium-heavy duty and reinforced
Overview
- highly abrasion resistant suction hose + pressure hose, polyurethane hose
- FDA and EU compliant
- Wall thickness 0.04 inch
- -40°F to +195°F (+255°F)
To the product
NORPLAST® PUR 385 AS (LD)
Antistatic polyurethane hose, light weight, microbe resistant
Overview
- highly abrasion resistant suction hose + pressure hose
- antistatic approx. 10⁹ Ω
- transparent
To the product
Hoses for shot blasting / sand blasting
Applications and properties:
Various techniques or methods are used in surface processing. In the case of surface preparation methods such as shot blasting or sand blasting, the shot or sand blasting material has to be returned to the blasting chamber after its use. Due to the abrasive effect of the blasting media, the used hose must have a high abrasion resistance. The products AIRDUC® PUR 355 AS (HD) and AIRDUC® PUR 356 AS (XHD) are particularly recommended for this purpose. The AIRDUC® PUR 350 AS (MD) and the NORPLAST® PUR 385 AS (LD), which offer high flexibility as well as abrasion resistance, are recommended as an alternative for use on floor preparation machines or grinding machines.
Frequently asked questions:
Which product is suitable for sand blasting recovery?
Depending on requirements, we offer light, medium and heavy hose types. All products listed in this category are suitable for sand blasting recovery.
Technical details and standards:
All antistatic hoses which are presented in this section have the following properties:
• Permanently antistatic wall: electrical and surface resistance < 109 ohm
• Certified according to TRGS 727 and ATEX 2014/34/EU
Further information on electrostatic charging can be found here.
The following hose types are according to the product standard DIN EN 26057:
• Type 2: AIRDUC® PUR 350 AS (MD)
• Type 3: AIRDUC® PUR 355 AS (HD)
• Type 4: AIRDUC® PUR 356 AS (XHD)
The following hose types are flame-retardant:
• according to DIN 4102-B1: PROTAPE® PUR 330 AS (LD)
• according to DIN 4102-B1 and conform to the safety regulations of the German Wood Trade: AIRDUC® PUR 350 AS (MD) / PUR 355 AS (HD), NORPLAST® PUR 385 AS (LD)
• according to UL94-V2: AIRDUC® PUR 355 AS (HD)
• according to UL94-HB: AIRDUC® PUR 351 FOOD (MD)
For technical support please do not hesitate to contact us!
Applications and properties:
Various techniques or methods are used in surface processing. In the case of surface preparation methods such as shot blasting or sand blasting, the shot or sand blasting material has to be returned to the blasting chamber after its use. Due to the abrasive effect of the blasting media, the used hose must have a high abrasion resistance. The products AIRDUC® PUR 355 AS (HD) and AIRDUC® PUR 356 AS (XHD) are particularly recommended for this purpose. The AIRDUC® PUR 350 AS (MD) and the NORPLAST® PUR 385 AS (LD), which offer high flexibility as well as abrasion resistance, are recommended as an alternative for use on floor preparation machines or grinding machines.
Frequently asked questions:
Which product is suitable for sand blasting recovery?
Depending on requirements, we offer light, medium and heavy hose types. All products listed in this category are suitable for sand blasting recovery.
Technical details and standards:
All antistatic hoses which are presented in this section have the following properties:
• Permanently antistatic wall: electrical and surface resistance < 109 ohm
• Certified according to TRGS 727 and ATEX 2014/34/EU
Further information on electrostatic charging can be found here.
The following hose types are according to the product standard DIN EN 26057:
• Type 2: AIRDUC® PUR 350 AS (MD)
• Type 3: AIRDUC® PUR 355 AS (HD)
• Type 4: AIRDUC® PUR 356 AS (XHD)
The following hose types are flame-retardant:
• according to DIN 4102-B1: PROTAPE® PUR 330 AS (LD)
• according to DIN 4102-B1 and conform to the safety regulations of the German Wood Trade: AIRDUC® PUR 350 AS (MD) / PUR 355 AS (HD), NORPLAST® PUR 385 AS (LD)
• according to UL94-V2: AIRDUC® PUR 355 AS (HD)
• according to UL94-HB: AIRDUC® PUR 351 FOOD (MD)
For technical support please do not hesitate to contact us!