.svg){kind=logo}
PROTAPE® TPE 326 MEMORY
Crush resistant exhaust gas hose
Product details
Applications
- flexible hose/ ducting for hot gases
- vehicle gas exhaust system, car gas extraction: hose reel, slotted floor channel, underfloor extraction system
- engine test bench, exhaust gas measurement
Properties
- fabric reinforced
- highly flexible + compressible
- protected, flow-optimizing exterior folds
- vibration resistant
- crush resistant
- good resistance to chemicals
- conforms to RoHS guideline
- REACH according to --> Technology / Technical Information / REACH
Temperature Range
- exhaust gas temperatures to 200°C *
- * when correctly applied with exhaust gas funnels and sufficient fresh air supply (50% approx.).
Design
- PROTAPE® tape hose
- 1. special plastic-profile supporting spiral
- 2. fabric-reinforced tape; wall: EPDM/ PP coated fabric
- 3. wall thickness 0,4 mm approx.
Delivery variants
- further diameters and lengths available on request
- black (standard)
- special colours: coloured spiral
- customer-specific branding
Article variants
I.D.
(in / mm)
(in / mm)
outer Ø
(mm)
(mm)
Vacuum
(bar)
(bar)
Bending
Radius
(mm)
Radius
(mm)
Weight
(kg/m)
(kg/m)
Dimensions
in Stock
(m)
in Stock
(m)
Production
Lengths
(m)
Lengths
(m)
Order No.
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (mm)
68.00
Vacuum (bar)
0,400
Bending Radius (mm)
48.00
Weight (kg/m)
0.38
Dimensions in Stock (m)
10
Production Lengths (m)
15
Further Article Details
I.D. (in / mm)
2,5 / 63-65
outer Ø (mm)
80.00
Vacuum (bar)
0,280
Bending Radius (mm)
53.00
Weight (kg/m)
0.48
Dimensions in Stock (m)
10 15 20
Production Lengths (m)
-
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (mm)
93.00
Vacuum (bar)
0,170
Bending Radius (mm)
60.00
Weight (kg/m)
0.54
Dimensions in Stock (m)
10 15 20
Production Lengths (m)
-
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (mm)
119.00
Vacuum (bar)
0,050
Bending Radius (mm)
71.00
Weight (kg/m)
0.71
Dimensions in Stock (m)
5 7,5 10 15 20
Production Lengths (m)
6 12,5
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (mm)
144.00
Vacuum (bar)
0,035
Bending Radius (mm)
100.00
Weight (kg/m)
0.87
Dimensions in Stock (m)
10 15 20
Production Lengths (m)
5 6 7,5 12,5
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (mm)
169.00
Vacuum (bar)
0,030
Bending Radius (mm)
110.00
Weight (kg/m)
1.04
Dimensions in Stock (m)
10 15
Production Lengths (m)
5 6 7,5 12,5
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (mm)
220.00
Vacuum (bar)
0,010
Bending Radius (mm)
155.00
Weight (kg/m)
1.37
Dimensions in Stock (m)
-
Production Lengths (m)
5 6 7,5 10 12,5
Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the inside of the hose arch. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data. Additional information at www.norres.com/en/technology/.
Accessories
CLAMP 212
Bridge clamp for attaching externally corrugated spiral hoses
To the product
CLAMP 213
Bridge Clamp with quick-release closure for attaching externally corrugated spiral hoses
To the product
CLAMP 217
Bridge clamp with eyelet for attaching externally corrugated spiral hoses
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT 270-271
Metal hose connector / reducer
To the product