en

AIRDUC® PUR 355 AS TWIN COLOR (HD)

New
AIRDUC_PUR_355_AS_TWIN_COLOR_(HD)_main.jpg
AIRDUC_PUR_355_AS_TWIN_COLOR_(HD)_main.jpg design
Antistatic polyurethane hose, heavy, microbe resistant
Gas + Dust + Solid + Fluid Pre-PUR® Abrasion-resistant Smooth interior Microbe-resistant Antistatic and electrically conductive hoses Special wire adhesion
Request
Datasheet
Product details Article variants Documents Accessories

Product details

Application

  • flexible hose/ ducting for high throughput of abrasive powder, bulk material, granulate and for gases
  • plastic industry, conveying of granulates and powders: granulate conveying equipment, vacuum hopper/ conveyor, suction conveyor, dosing system, bulk-bag (big bag)-charging and discharging, shredder, mill, extruder, injection moulding machine
  • printed circuit board drilling machine (PCB)
  • powder spraying, powder coating: e.g. printing industry
  • offset printing machine: air supply, air supply cabinet
  • industrial vacuum cleaners, vacuum cleaners
  • explosion hazard area
  • agricultural industry, conveying of seed and fertilizers: seeding machine, seed drill, drilling machine
  • agricultural industry: pneumatic grain conveyer
  • construction industry, road milling machine
  • raw material conveying hose for powders, granulates, sand, quartz, gravel, shards and chips/ shavings
  • compressor, side channel blower, vacuum pump, pressure pump, pump
  • paper mill, paper and pulp industry, packaging machine: edge strip suctioning system/ edge trim exhaust systems
  • surface preparation: shot blasting/ sand blasting recovery e.g. at blasting chamber, ship yard, stripping machine, flooring preparation machine, grinding machine
  • municipal vehicle: sweeper, sweeping machine
  • municipal vehicle: lawn mower, slope mower, leaf blower/ leaf collector

Properties

  • heavy duty
  • highly abrasion resistant
  • increased pressure and vacuum resistance
  • microbe resistant
  • good resistance to oil, gasoline and chemicals
  • very good low temperature flexibility
  • permanently antistatic wall: according to ISO 8031 electrical and surface resistance <10⁹ Ω (according to TRGS 727 <2,5*10⁸ Ω*m and NFPA 652 10⁸-10⁹ Ω)
  • in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: pneumatic transport of flammable dusts and bulk materials (Zone 20, 21, 22 inside), aspiration of combustible dusts (Zone 22 inside),
  • in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: for conveying for flammable liquids (inside zone 0, 1, 2), for conveying for non-flammable liquids, for use in zone 1 and 2 (gases), for use in zone 0 (gases)
  • according to DIN 26057 Type 3
  • REACH according to --> Technology / Technical Information / REACH

Temperature Range

  • -40°C to 90°C
  • short time to 125°C

Design

  • AIRDUC® profile hose
  • 1. spring steel wire firmly embedded in wall
  • 2. wall: permanently antistatic premium ester-polyurethane (Pre-PUR®)
  • 3. wall thickness 1,4 - 1,5 mm approx.

Delivery variants

  • further diameters and lengths available on request
  • customer-specific branding
  • Available in 5m, 10m and 15m lengths
  • Wall black and coloured helix: blue, green, red, yellow (standard)
  • further colours on request

Article variants

I.D.


(in / mm)
outer Ø


(mm)
Pressure
DIN 26057
(50% Elongation)
(bar)
Vacuum
DIN 26057
(axially fixed)
(bar)
Bending
Radius

(mm)
Weight


(kg/m)
Minimum
Quantity

(m)
Order No.
black + blue
1,25 / 32
42.00
3,770 (7,15)
1,000 (1,00)
26.00
0.44
150
355-0032-0996
Further Article Details
I.D. (in / mm)
1,25 / 32
outer Ø (mm)
42.00
Pressure DIN 26057 (50% Elongation) (bar)
3,770 (7,15)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
26.00
Weight (kg/m)
0.44
Minimum Quantity (m)
150
1,5 / 38
48.00
3,215 (6,07)
1,000 (1,00)
29.00
0.52
150
355-0038-0996
Further Article Details
I.D. (in / mm)
1,5 / 38
outer Ø (mm)
48.00
Pressure DIN 26057 (50% Elongation) (bar)
3,215 (6,07)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
29.00
Weight (kg/m)
0.52
Minimum Quantity (m)
150
- / 40
50.00
3,065 (5,78)
1,000 (1,00)
30.00
0.54
150
355-0040-0996
Further Article Details
I.D. (in / mm)
- / 40
outer Ø (mm)
50.00
Pressure DIN 26057 (50% Elongation) (bar)
3,065 (5,78)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
30.00
Weight (kg/m)
0.54
Minimum Quantity (m)
150
2 / 50-51
60.00
2,485 (4,67)
0,825 (1,00)
35.00
0.66
150
355-0050-0996
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (mm)
60.00
Pressure DIN 26057 (50% Elongation) (bar)
2,485 (4,67)
Vacuum DIN 26057 (axially fixed) (bar)
0,825 (1,00)
Bending Radius (mm)
35.00
Weight (kg/m)
0.66
Minimum Quantity (m)
150
2,36 / 60
70.00
2,090 (3,91)
0,685 (1,00)
40.00
0.78
150
355-0060-0996
Further Article Details
I.D. (in / mm)
2,36 / 60
outer Ø (mm)
70.00
Pressure DIN 26057 (50% Elongation) (bar)
2,090 (3,91)
Vacuum DIN 26057 (axially fixed) (bar)
0,685 (1,00)
Bending Radius (mm)
40.00
Weight (kg/m)
0.78
Minimum Quantity (m)
150
2,5 / 63-65
75.00
1,935 (3,62)
0,635 (1,00)
43.00
0.84
150
355-0065-0996
Further Article Details
I.D. (in / mm)
2,5 / 63-65
outer Ø (mm)
75.00
Pressure DIN 26057 (50% Elongation) (bar)
1,935 (3,62)
Vacuum DIN 26057 (axially fixed) (bar)
0,635 (1,00)
Bending Radius (mm)
43.00
Weight (kg/m)
0.84
Minimum Quantity (m)
150
- / 70
81.00
1,800 (3,37)
0,540 (1,00)
62.00
0.98
150
355-0070-0996
Further Article Details
I.D. (in / mm)
- / 70
outer Ø (mm)
81.00
Pressure DIN 26057 (50% Elongation) (bar)
1,800 (3,37)
Vacuum DIN 26057 (axially fixed) (bar)
0,540 (1,00)
Bending Radius (mm)
62.00
Weight (kg/m)
0.98
Minimum Quantity (m)
150
3 / 75-76
86.00
1,685 (3,15)
0,505 (1,00)
66.00
1.05
100
355-0075-0996
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (mm)
86.00
Pressure DIN 26057 (50% Elongation) (bar)
1,685 (3,15)
Vacuum DIN 26057 (axially fixed) (bar)
0,505 (1,00)
Bending Radius (mm)
66.00
Weight (kg/m)
1.05
Minimum Quantity (m)
100
- / 80
91.00
1,585 (2,96)
0,475 (1,00)
69.00
1.11
100
355-0080-0996
Further Article Details
I.D. (in / mm)
- / 80
outer Ø (mm)
91.00
Pressure DIN 26057 (50% Elongation) (bar)
1,585 (2,96)
Vacuum DIN 26057 (axially fixed) (bar)
0,475 (1,00)
Bending Radius (mm)
69.00
Weight (kg/m)
1.11
Minimum Quantity (m)
100
- / 85
96.00
1,545 (2,85)
0,465 (0,95)
73.00
1.21
100
355-0085-0996
Further Article Details
I.D. (in / mm)
- / 85
outer Ø (mm)
96.00
Pressure DIN 26057 (50% Elongation) (bar)
1,545 (2,85)
Vacuum DIN 26057 (axially fixed) (bar)
0,465 (0,95)
Bending Radius (mm)
73.00
Weight (kg/m)
1.21
Minimum Quantity (m)
100
4 / 100-102
111.00
1,275 (2,38)
0,390 (0,93)
83.00
1.49
100
355-0100-0996
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (mm)
111.00
Pressure DIN 26057 (50% Elongation) (bar)
1,275 (2,38)
Vacuum DIN 26057 (axially fixed) (bar)
0,390 (0,93)
Bending Radius (mm)
83.00
Weight (kg/m)
1.49
Minimum Quantity (m)
100
5 / 125-127
136.00
1,025 (1,91)
0,315 (0,60)
101.00
1.84
100
355-0125-0996
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (mm)
136.00
Pressure DIN 26057 (50% Elongation) (bar)
1,025 (1,91)
Vacuum DIN 26057 (axially fixed) (bar)
0,315 (0,60)
Bending Radius (mm)
101.00
Weight (kg/m)
1.84
Minimum Quantity (m)
100
5,5 / 140
151.00
0,920 (1,71)
0,280 (0,48)
111.00
2.03
80
355-0140-0996
Further Article Details
I.D. (in / mm)
5,5 / 140
outer Ø (mm)
151.00
Pressure DIN 26057 (50% Elongation) (bar)
0,920 (1,71)
Vacuum DIN 26057 (axially fixed) (bar)
0,280 (0,48)
Bending Radius (mm)
111.00
Weight (kg/m)
2.03
Minimum Quantity (m)
80
6 / 150-152
161.00
0,860 (1,59)
0,270 (0,53)
118.00
2.41
80
355-0150-0996
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (mm)
161.00
Pressure DIN 26057 (50% Elongation) (bar)
0,860 (1,59)
Vacuum DIN 26057 (axially fixed) (bar)
0,270 (0,53)
Bending Radius (mm)
118.00
Weight (kg/m)
2.41
Minimum Quantity (m)
80
6,3 / 160
171.00
0,805 (1,50)
0,255 (0,47)
125.00
2.56
80
355-0160-0996
Further Article Details
I.D. (in / mm)
6,3 / 160
outer Ø (mm)
171.00
Pressure DIN 26057 (50% Elongation) (bar)
0,805 (1,50)
Vacuum DIN 26057 (axially fixed) (bar)
0,255 (0,47)
Bending Radius (mm)
125.00
Weight (kg/m)
2.56
Minimum Quantity (m)
80
8 / 200-203
213.00
0,645 (1,20)
0,150 (0,36)
156.00
3.12
60
355-0200-0996
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (mm)
213.00
Pressure DIN 26057 (50% Elongation) (bar)
0,645 (1,20)
Vacuum DIN 26057 (axially fixed) (bar)
0,150 (0,36)
Bending Radius (mm)
156.00
Weight (kg/m)
3.12
Minimum Quantity (m)
60
black + green
1,25 / 32
42.00
3,770 (7,15)
1,000 (1,00)
26.00
0.44
150
355-0032-0997
Further Article Details
I.D. (in / mm)
1,25 / 32
outer Ø (mm)
42.00
Pressure DIN 26057 (50% Elongation) (bar)
3,770 (7,15)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
26.00
Weight (kg/m)
0.44
Minimum Quantity (m)
150
1,5 / 38
48.00
3,215 (6,07)
1,000 (1,00)
29.00
0.52
150
355-0038-0997
Further Article Details
I.D. (in / mm)
1,5 / 38
outer Ø (mm)
48.00
Pressure DIN 26057 (50% Elongation) (bar)
3,215 (6,07)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
29.00
Weight (kg/m)
0.52
Minimum Quantity (m)
150
- / 40
50.00
3,065 (5,78)
1,000 (1,00)
30.00
0.54
150
355-0040-0997
Further Article Details
I.D. (in / mm)
- / 40
outer Ø (mm)
50.00
Pressure DIN 26057 (50% Elongation) (bar)
3,065 (5,78)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
30.00
Weight (kg/m)
0.54
Minimum Quantity (m)
150
2 / 50-51
60.00
2,485 (4,67)
0,825 (1,00)
35.00
0.66
150
355-0050-0997
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (mm)
60.00
Pressure DIN 26057 (50% Elongation) (bar)
2,485 (4,67)
Vacuum DIN 26057 (axially fixed) (bar)
0,825 (1,00)
Bending Radius (mm)
35.00
Weight (kg/m)
0.66
Minimum Quantity (m)
150
2,36 / 60
70.00
2,090 (3,91)
0,685 (1,00)
40.00
0.78
150
355-0060-0997
Further Article Details
I.D. (in / mm)
2,36 / 60
outer Ø (mm)
70.00
Pressure DIN 26057 (50% Elongation) (bar)
2,090 (3,91)
Vacuum DIN 26057 (axially fixed) (bar)
0,685 (1,00)
Bending Radius (mm)
40.00
Weight (kg/m)
0.78
Minimum Quantity (m)
150
2,5 / 63-65
75.00
1,935 (3,62)
0,635 (1,00)
43.00
0.84
150
355-0065-0997
Further Article Details
I.D. (in / mm)
2,5 / 63-65
outer Ø (mm)
75.00
Pressure DIN 26057 (50% Elongation) (bar)
1,935 (3,62)
Vacuum DIN 26057 (axially fixed) (bar)
0,635 (1,00)
Bending Radius (mm)
43.00
Weight (kg/m)
0.84
Minimum Quantity (m)
150
- / 70
81.00
1,800 (3,37)
0,540 (1,00)
62.00
0.98
150
355-0070-0997
Further Article Details
I.D. (in / mm)
- / 70
outer Ø (mm)
81.00
Pressure DIN 26057 (50% Elongation) (bar)
1,800 (3,37)
Vacuum DIN 26057 (axially fixed) (bar)
0,540 (1,00)
Bending Radius (mm)
62.00
Weight (kg/m)
0.98
Minimum Quantity (m)
150
3 / 75-76
86.00
1,685 (3,15)
0,505 (1,00)
66.00
1.05
100
355-0075-0997
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (mm)
86.00
Pressure DIN 26057 (50% Elongation) (bar)
1,685 (3,15)
Vacuum DIN 26057 (axially fixed) (bar)
0,505 (1,00)
Bending Radius (mm)
66.00
Weight (kg/m)
1.05
Minimum Quantity (m)
100
- / 80
91.00
1,585 (2,96)
0,475 (1,00)
69.00
1.11
100
355-0080-0997
Further Article Details
I.D. (in / mm)
- / 80
outer Ø (mm)
91.00
Pressure DIN 26057 (50% Elongation) (bar)
1,585 (2,96)
Vacuum DIN 26057 (axially fixed) (bar)
0,475 (1,00)
Bending Radius (mm)
69.00
Weight (kg/m)
1.11
Minimum Quantity (m)
100
- / 85
96.00
1,545 (2,85)
0,465 (0,95)
73.00
1.21
100
355-0085-0997
Further Article Details
I.D. (in / mm)
- / 85
outer Ø (mm)
96.00
Pressure DIN 26057 (50% Elongation) (bar)
1,545 (2,85)
Vacuum DIN 26057 (axially fixed) (bar)
0,465 (0,95)
Bending Radius (mm)
73.00
Weight (kg/m)
1.21
Minimum Quantity (m)
100
4 / 100-102
111.00
1,275 (2,38)
0,390 (0,93)
83.00
1.49
100
355-0100-0997
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (mm)
111.00
Pressure DIN 26057 (50% Elongation) (bar)
1,275 (2,38)
Vacuum DIN 26057 (axially fixed) (bar)
0,390 (0,93)
Bending Radius (mm)
83.00
Weight (kg/m)
1.49
Minimum Quantity (m)
100
5 / 125-127
136.00
1,025 (1,91)
0,315 (0,60)
101.00
1.84
100
355-0125-0997
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (mm)
136.00
Pressure DIN 26057 (50% Elongation) (bar)
1,025 (1,91)
Vacuum DIN 26057 (axially fixed) (bar)
0,315 (0,60)
Bending Radius (mm)
101.00
Weight (kg/m)
1.84
Minimum Quantity (m)
100
5,5 / 140
151.00
0,920 (1,71)
0,280 (0,48)
111.00
2.03
80
355-0140-0997
Further Article Details
I.D. (in / mm)
5,5 / 140
outer Ø (mm)
151.00
Pressure DIN 26057 (50% Elongation) (bar)
0,920 (1,71)
Vacuum DIN 26057 (axially fixed) (bar)
0,280 (0,48)
Bending Radius (mm)
111.00
Weight (kg/m)
2.03
Minimum Quantity (m)
80
6 / 150-152
161.00
0,860 (1,59)
0,270 (0,53)
118.00
2.41
80
355-0150-0997
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (mm)
161.00
Pressure DIN 26057 (50% Elongation) (bar)
0,860 (1,59)
Vacuum DIN 26057 (axially fixed) (bar)
0,270 (0,53)
Bending Radius (mm)
118.00
Weight (kg/m)
2.41
Minimum Quantity (m)
80
6,3 / 160
171.00
0,805 (1,50)
0,255 (0,47)
125.00
2.56
80
355-0160-0997
Further Article Details
I.D. (in / mm)
6,3 / 160
outer Ø (mm)
171.00
Pressure DIN 26057 (50% Elongation) (bar)
0,805 (1,50)
Vacuum DIN 26057 (axially fixed) (bar)
0,255 (0,47)
Bending Radius (mm)
125.00
Weight (kg/m)
2.56
Minimum Quantity (m)
80
8 / 200-203
213.00
0,645 (1,20)
0,150 (0,36)
156.00
3.12
60
355-0200-0997
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (mm)
213.00
Pressure DIN 26057 (50% Elongation) (bar)
0,645 (1,20)
Vacuum DIN 26057 (axially fixed) (bar)
0,150 (0,36)
Bending Radius (mm)
156.00
Weight (kg/m)
3.12
Minimum Quantity (m)
60
black + yellow
1,25 / 32
42.00
3,770 (7,15)
1,000 (1,00)
26.00
0.44
150
355-0032-0998
Further Article Details
I.D. (in / mm)
1,25 / 32
outer Ø (mm)
42.00
Pressure DIN 26057 (50% Elongation) (bar)
3,770 (7,15)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
26.00
Weight (kg/m)
0.44
Minimum Quantity (m)
150
1,5 / 38
48.00
3,215 (6,07)
1,000 (1,00)
29.00
0.52
150
355-0038-0998
Further Article Details
I.D. (in / mm)
1,5 / 38
outer Ø (mm)
48.00
Pressure DIN 26057 (50% Elongation) (bar)
3,215 (6,07)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
29.00
Weight (kg/m)
0.52
Minimum Quantity (m)
150
- / 40
50.00
3,065 (5,78)
1,000 (1,00)
30.00
0.54
150
355-0040-0998
Further Article Details
I.D. (in / mm)
- / 40
outer Ø (mm)
50.00
Pressure DIN 26057 (50% Elongation) (bar)
3,065 (5,78)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
30.00
Weight (kg/m)
0.54
Minimum Quantity (m)
150
2 / 50-51
60.00
2,485 (4,67)
0,825 (1,00)
35.00
0.66
150
355-0050-0998
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (mm)
60.00
Pressure DIN 26057 (50% Elongation) (bar)
2,485 (4,67)
Vacuum DIN 26057 (axially fixed) (bar)
0,825 (1,00)
Bending Radius (mm)
35.00
Weight (kg/m)
0.66
Minimum Quantity (m)
150
2,36 / 60
70.00
2,090 (3,91)
0,685 (1,00)
40.00
0.78
150
355-0060-0998
Further Article Details
I.D. (in / mm)
2,36 / 60
outer Ø (mm)
70.00
Pressure DIN 26057 (50% Elongation) (bar)
2,090 (3,91)
Vacuum DIN 26057 (axially fixed) (bar)
0,685 (1,00)
Bending Radius (mm)
40.00
Weight (kg/m)
0.78
Minimum Quantity (m)
150
2,5 / 63-65
75.00
1,935 (3,62)
0,635 (1,00)
43.00
0.84
150
355-0065-0998
Further Article Details
I.D. (in / mm)
2,5 / 63-65
outer Ø (mm)
75.00
Pressure DIN 26057 (50% Elongation) (bar)
1,935 (3,62)
Vacuum DIN 26057 (axially fixed) (bar)
0,635 (1,00)
Bending Radius (mm)
43.00
Weight (kg/m)
0.84
Minimum Quantity (m)
150
- / 70
81.00
1,800 (3,37)
0,540 (1,00)
62.00
0.98
150
355-0070-0998
Further Article Details
I.D. (in / mm)
- / 70
outer Ø (mm)
81.00
Pressure DIN 26057 (50% Elongation) (bar)
1,800 (3,37)
Vacuum DIN 26057 (axially fixed) (bar)
0,540 (1,00)
Bending Radius (mm)
62.00
Weight (kg/m)
0.98
Minimum Quantity (m)
150
3 / 75-76
86.00
1,685 (3,15)
0,505 (1,00)
66.00
1.05
100
355-0075-0998
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (mm)
86.00
Pressure DIN 26057 (50% Elongation) (bar)
1,685 (3,15)
Vacuum DIN 26057 (axially fixed) (bar)
0,505 (1,00)
Bending Radius (mm)
66.00
Weight (kg/m)
1.05
Minimum Quantity (m)
100
- / 80
91.00
1,585 (2,96)
0,475 (1,00)
69.00
1.11
100
355-0080-0998
Further Article Details
I.D. (in / mm)
- / 80
outer Ø (mm)
91.00
Pressure DIN 26057 (50% Elongation) (bar)
1,585 (2,96)
Vacuum DIN 26057 (axially fixed) (bar)
0,475 (1,00)
Bending Radius (mm)
69.00
Weight (kg/m)
1.11
Minimum Quantity (m)
100
- / 85
96.00
1,545 (2,85)
0,465 (0,95)
73.00
1.21
100
355-0085-0998
Further Article Details
I.D. (in / mm)
- / 85
outer Ø (mm)
96.00
Pressure DIN 26057 (50% Elongation) (bar)
1,545 (2,85)
Vacuum DIN 26057 (axially fixed) (bar)
0,465 (0,95)
Bending Radius (mm)
73.00
Weight (kg/m)
1.21
Minimum Quantity (m)
100
4 / 100-102
111.00
1,275 (2,38)
0,390 (0,93)
83.00
1.49
100
355-0100-0998
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (mm)
111.00
Pressure DIN 26057 (50% Elongation) (bar)
1,275 (2,38)
Vacuum DIN 26057 (axially fixed) (bar)
0,390 (0,93)
Bending Radius (mm)
83.00
Weight (kg/m)
1.49
Minimum Quantity (m)
100
5 / 125-127
136.00
1,025 (1,91)
0,315 (0,60)
101.00
1.84
100
355-0125-0998
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (mm)
136.00
Pressure DIN 26057 (50% Elongation) (bar)
1,025 (1,91)
Vacuum DIN 26057 (axially fixed) (bar)
0,315 (0,60)
Bending Radius (mm)
101.00
Weight (kg/m)
1.84
Minimum Quantity (m)
100
5,5 / 140
151.00
0,920 (1,71)
0,280 (0,48)
111.00
2.03
80
355-0140-0998
Further Article Details
I.D. (in / mm)
5,5 / 140
outer Ø (mm)
151.00
Pressure DIN 26057 (50% Elongation) (bar)
0,920 (1,71)
Vacuum DIN 26057 (axially fixed) (bar)
0,280 (0,48)
Bending Radius (mm)
111.00
Weight (kg/m)
2.03
Minimum Quantity (m)
80
6 / 150-152
161.00
0,860 (1,59)
0,270 (0,53)
118.00
2.41
80
355-0150-0998
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (mm)
161.00
Pressure DIN 26057 (50% Elongation) (bar)
0,860 (1,59)
Vacuum DIN 26057 (axially fixed) (bar)
0,270 (0,53)
Bending Radius (mm)
118.00
Weight (kg/m)
2.41
Minimum Quantity (m)
80
6,3 / 160
171.00
0,805 (1,50)
0,255 (0,47)
125.00
2.56
80
355-0160-0998
Further Article Details
I.D. (in / mm)
6,3 / 160
outer Ø (mm)
171.00
Pressure DIN 26057 (50% Elongation) (bar)
0,805 (1,50)
Vacuum DIN 26057 (axially fixed) (bar)
0,255 (0,47)
Bending Radius (mm)
125.00
Weight (kg/m)
2.56
Minimum Quantity (m)
80
8 / 200-203
213.00
0,645 (1,20)
0,150 (0,36)
156.00
3.12
60
355-0200-0998
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (mm)
213.00
Pressure DIN 26057 (50% Elongation) (bar)
0,645 (1,20)
Vacuum DIN 26057 (axially fixed) (bar)
0,150 (0,36)
Bending Radius (mm)
156.00
Weight (kg/m)
3.12
Minimum Quantity (m)
60
black + red
1,25 / 32
42.00
3,770 (7,15)
1,000 (1,00)
26.00
0.44
150
355-0032-0999
Further Article Details
I.D. (in / mm)
1,25 / 32
outer Ø (mm)
42.00
Pressure DIN 26057 (50% Elongation) (bar)
3,770 (7,15)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
26.00
Weight (kg/m)
0.44
Minimum Quantity (m)
150
1,5 / 38
48.00
3,215 (6,07)
1,000 (1,00)
29.00
0.52
150
355-0038-0999
Further Article Details
I.D. (in / mm)
1,5 / 38
outer Ø (mm)
48.00
Pressure DIN 26057 (50% Elongation) (bar)
3,215 (6,07)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
29.00
Weight (kg/m)
0.52
Minimum Quantity (m)
150
- / 40
50.00
3,065 (5,78)
1,000 (1,00)
30.00
0.54
150
355-0040-0999
Further Article Details
I.D. (in / mm)
- / 40
outer Ø (mm)
50.00
Pressure DIN 26057 (50% Elongation) (bar)
3,065 (5,78)
Vacuum DIN 26057 (axially fixed) (bar)
1,000 (1,00)
Bending Radius (mm)
30.00
Weight (kg/m)
0.54
Minimum Quantity (m)
150
2 / 50-51
60.00
2,485 (4,67)
0,825 (1,00)
35.00
0.66
150
355-0050-0999
Further Article Details
I.D. (in / mm)
2 / 50-51
outer Ø (mm)
60.00
Pressure DIN 26057 (50% Elongation) (bar)
2,485 (4,67)
Vacuum DIN 26057 (axially fixed) (bar)
0,825 (1,00)
Bending Radius (mm)
35.00
Weight (kg/m)
0.66
Minimum Quantity (m)
150
2,36 / 60
70.00
2,090 (3,91)
0,685 (1,00)
40.00
0.78
150
355-0060-0999
Further Article Details
I.D. (in / mm)
2,36 / 60
outer Ø (mm)
70.00
Pressure DIN 26057 (50% Elongation) (bar)
2,090 (3,91)
Vacuum DIN 26057 (axially fixed) (bar)
0,685 (1,00)
Bending Radius (mm)
40.00
Weight (kg/m)
0.78
Minimum Quantity (m)
150
2,5 / 63-65
75.00
1,935 (3,62)
0,635 (1,00)
43.00
0.84
150
355-0065-0999
Further Article Details
I.D. (in / mm)
2,5 / 63-65
outer Ø (mm)
75.00
Pressure DIN 26057 (50% Elongation) (bar)
1,935 (3,62)
Vacuum DIN 26057 (axially fixed) (bar)
0,635 (1,00)
Bending Radius (mm)
43.00
Weight (kg/m)
0.84
Minimum Quantity (m)
150
- / 70
81.00
1,800 (3,37)
0,540 (1,00)
62.00
0.98
150
355-0070-0999
Further Article Details
I.D. (in / mm)
- / 70
outer Ø (mm)
81.00
Pressure DIN 26057 (50% Elongation) (bar)
1,800 (3,37)
Vacuum DIN 26057 (axially fixed) (bar)
0,540 (1,00)
Bending Radius (mm)
62.00
Weight (kg/m)
0.98
Minimum Quantity (m)
150
3 / 75-76
86.00
1,685 (3,15)
0,505 (1,00)
66.00
1.05
100
355-0075-0999
Further Article Details
I.D. (in / mm)
3 / 75-76
outer Ø (mm)
86.00
Pressure DIN 26057 (50% Elongation) (bar)
1,685 (3,15)
Vacuum DIN 26057 (axially fixed) (bar)
0,505 (1,00)
Bending Radius (mm)
66.00
Weight (kg/m)
1.05
Minimum Quantity (m)
100
- / 80
91.00
1,585 (2,96)
0,475 (1,00)
69.00
1.11
100
355-0080-0999
Further Article Details
I.D. (in / mm)
- / 80
outer Ø (mm)
91.00
Pressure DIN 26057 (50% Elongation) (bar)
1,585 (2,96)
Vacuum DIN 26057 (axially fixed) (bar)
0,475 (1,00)
Bending Radius (mm)
69.00
Weight (kg/m)
1.11
Minimum Quantity (m)
100
- / 85
96.00
1,545 (2,85)
0,465 (0,95)
73.00
1.21
100
355-0085-0999
Further Article Details
I.D. (in / mm)
- / 85
outer Ø (mm)
96.00
Pressure DIN 26057 (50% Elongation) (bar)
1,545 (2,85)
Vacuum DIN 26057 (axially fixed) (bar)
0,465 (0,95)
Bending Radius (mm)
73.00
Weight (kg/m)
1.21
Minimum Quantity (m)
100
4 / 100-102
111.00
1,275 (2,38)
0,390 (0,93)
83.00
1.49
100
355-0100-0999
Further Article Details
I.D. (in / mm)
4 / 100-102
outer Ø (mm)
111.00
Pressure DIN 26057 (50% Elongation) (bar)
1,275 (2,38)
Vacuum DIN 26057 (axially fixed) (bar)
0,390 (0,93)
Bending Radius (mm)
83.00
Weight (kg/m)
1.49
Minimum Quantity (m)
100
5 / 125-127
136.00
1,025 (1,91)
0,315 (0,60)
101.00
1.84
100
355-0125-0999
Further Article Details
I.D. (in / mm)
5 / 125-127
outer Ø (mm)
136.00
Pressure DIN 26057 (50% Elongation) (bar)
1,025 (1,91)
Vacuum DIN 26057 (axially fixed) (bar)
0,315 (0,60)
Bending Radius (mm)
101.00
Weight (kg/m)
1.84
Minimum Quantity (m)
100
5,5 / 140
151.00
0,920 (1,71)
0,280 (0,48)
111.00
2.03
80
355-0140-0999
Further Article Details
I.D. (in / mm)
5,5 / 140
outer Ø (mm)
151.00
Pressure DIN 26057 (50% Elongation) (bar)
0,920 (1,71)
Vacuum DIN 26057 (axially fixed) (bar)
0,280 (0,48)
Bending Radius (mm)
111.00
Weight (kg/m)
2.03
Minimum Quantity (m)
80
6 / 150-152
161.00
0,860 (1,59)
0,270 (0,53)
118.00
2.41
80
355-0150-0999
Further Article Details
I.D. (in / mm)
6 / 150-152
outer Ø (mm)
161.00
Pressure DIN 26057 (50% Elongation) (bar)
0,860 (1,59)
Vacuum DIN 26057 (axially fixed) (bar)
0,270 (0,53)
Bending Radius (mm)
118.00
Weight (kg/m)
2.41
Minimum Quantity (m)
80
6,3 / 160
171.00
0,805 (1,50)
0,255 (0,47)
125.00
2.56
80
355-0160-0999
Further Article Details
I.D. (in / mm)
6,3 / 160
outer Ø (mm)
171.00
Pressure DIN 26057 (50% Elongation) (bar)
0,805 (1,50)
Vacuum DIN 26057 (axially fixed) (bar)
0,255 (0,47)
Bending Radius (mm)
125.00
Weight (kg/m)
2.56
Minimum Quantity (m)
80
8 / 200-203
213.00
0,645 (1,20)
0,150 (0,36)
156.00
3.12
60
355-0200-0999
Further Article Details
I.D. (in / mm)
8 / 200-203
outer Ø (mm)
213.00
Pressure DIN 26057 (50% Elongation) (bar)
0,645 (1,20)
Vacuum DIN 26057 (axially fixed) (bar)
0,150 (0,36)
Bending Radius (mm)
156.00
Weight (kg/m)
3.12
Minimum Quantity (m)
60
Overpressure and underpressure are recommended threshold operating values, products can be subjected to higher loads upon request. The bending radius is measured through the inside of the hose arch. The right to make technical modifications is reserved. All values determined at 20°C and are approx. data. Additional information at www.norres.com/en/technology/.

Documents

Montagehinweis / Assembly Information (384.89 KB) Verlegerichtlinien / Installation guidelines (201.24 KB)

Accessories

CLAMP 212
Bridge clamp for attaching externally corrugated spiral hoses
To the product
CLAMP 212 EC
Bridge Clamp with integral grounding (via earth strip) for attaching externally corrugated spiral hoses
To the product
CLAMP 213
Bridge Clamp with quick-release closure for attaching externally corrugated spiral hoses
To the product
CLAMP 216
Hose Clamp for watertight attachment of heavy, externally corrugated spiral hoses
To the product
CLAMP 217
Bridge clamp with eyelet for attaching externally corrugated spiral hoses
To the product
CONNECT 223
Shrink sleeve for connecting one hose to another or to an adapter
To the product
CONNECT 228
Elastic clamp protection tape
To the product
CONNECT SAFETY CLAMP ASSEMBLY 231
Universal safety clamp coupling system incl. assembly if appropriate
To the product
CONNECT PRESS ASSEMBLY 232
Crimped coupling system incl. assembly
To the product
CONNECT MOULD ASSEMBLY 233
Potted coupling system incl. assembly
To the product
CONNECT THREAD FITTING 234
Threaded adapter
To the product
CONNECT 240 + 241 AS
Soft sleeve to slide onto connectors or push into pipes
To the product
CONNECT 242
Threaded adapter
To the product
CONNECT 243
Flanged pipe according to the popular pipe systems in the ventilation field (for example Jacob-Standard)
To the product
CONNECT 244
2-part loose flange to fit mating flanges acc. to DIN 2632/2633, hole pattern DIN-EN 1092-1
To the product
CONNECT 245
TRI-Clamp coupling to fit adapter acc. to DIN 32676
To the product
CONNECT 245 VAC-TRUCK
Tapered flange coupling system to fit adapter acc. to DIN 3016-3
To the product
CONNECT 246 AS
Spiral hose connector for connecting, lengthening or repairing spiral hoses
To the product
CONNECT STORZ DIN ALU 251
Storz suction coupling
To the product
CONNECT TANK TRUCK BRASS 252
Brass tank truck coupling
To the product
CONNECT KAMLOK ALU 253
Kamlok coupling
To the product
CONNECT KARDAN 254
Kardan coupling
To the product
CONNECT 270-271
Metal hose connector / reducer
To the product